Contact   Imprint   Advertising   Guidelines

Search found 98 matches

Go to advanced search

by handy
Fri Nov 09, 2018 5:28 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

for repairs or topcoats etc I use an epoxy resin with 10min pot time , sandable after 5 hrs.
Yur board will look better than new once it's finished.
by handy
Wed Nov 07, 2018 8:20 am
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

fill the leash plug with wax. Do that before you sand down the board to make sure the is ZERO wax where you carbon should stick.
When everything is finished take a hole saw and open the plug, sand the edges slightly and you are done.
by handy
Tue Nov 06, 2018 6:51 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

perfekt plan, just tape first the area you don't want to touch. then sand down the area you want to put the carbon, just slightly deeper than the rest. Tape off the bottom, put your carbon on cut it a little bit when you have wet it out (NOT BEFORE), put some peel ply on top. Let it cure, put anothe...
by handy
Tue Nov 06, 2018 5:54 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

looks good ! But you shoul put some glas on the top and for sure on the tail rail.
If you want to have a great looking board again, take a 165g carbon and but only that over the tail, this will be strong enough add maybe 50 grms
and will look great. Bottom just put a gloss coat and you will be fine.
by handy
Mon Nov 05, 2018 1:55 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

as you said, without a power sander, it will take you ages. After glassing the tail you need to apply a filler coat that should fill up your dents, sand again and spray paint it.
by handy
Mon Nov 05, 2018 1:37 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

sound like a good plan to me.
by handy
Mon Nov 05, 2018 1:15 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

that resin will work fine, perfect would be a slightly foaming resin. The plywood is only to keep the bottom nicely leveled. just tape the area where you don't want to have any resin, and put some plastic between the board and the plywood. resin that comes out of the cracks and the paint is no probl...
by handy
Mon Nov 05, 2018 12:22 pm
Forum: Board Builders
Topic: How can I repair a waveboard that was run-over by a car?
Replies: 36
Views: 2116

Re: How can I repair a waveboard that was run-over by a car?

as it's only the tail area, the easiest way for the repair is to inject some resin in the cracks, put a piece of plywood on the top and bottom and press it. When resin is cured, sand down +- half of the old glas, then glass over the whole tail with 2 layers of 6oz fiber glas . Btw, the black insert ...
by handy
Tue Oct 30, 2018 9:31 pm
Forum: Reviews
Topic: Ozone alpha
Replies: 14
Views: 1681

Re: Ozone alpha

yes, the public release will be tomorrow nov 1st.
by handy
Mon Oct 29, 2018 7:26 pm
Forum: Hydrofoil
Topic: Moses 2019
Replies: 37
Views: 5672

Re: Moses 2019

there will be a 81cm mast for 2019 should be avaiable from end of feb 2019

Go to advanced search

cron