Hi,
no problems on the Sun are not. The resin is a LH160 from Havelcomposites, the time for processing at 20 degrees 70-90 minutes depending on the humidity. It's vytvrzováno at 65 degrees, probably something around 8 hours. In the form of overnight.
Thank you for the compliments.

Hey,
a few boards from my workshop They are usually boards of low wind, except for one
Boards produced of carbon - vacuuming. Desing brother doing airbrush. Painted over a hard coat on ships.

Rocker 6cm concave 1.3 cm, weight 1550 g. Board is harder than Nobile 2HD.

More photos I made and fins

rynhardt wrote:carbon and glass in different orientations?

Topside - the first two layers perpendicular to the long side, at the core of two lanes with a width of 20 cm in 45 degrees
lower side - all layers perpendicular to the longer side.

sijandy wrote:Looks good, got anymore details on the layup and method? Nice paint job.

Thanks.

The first three layers - carbon 135 g
Core - 15 mm paulownia
the bottom layer twice - carbon 135 g + 125 g glass fiber once

Production vacuum pump.

Hey, so we threw on another piece full carbon, paulownia core. The size of 137x43. It is not yet finished works, so far only the bottom.

Errors: objebvují bubbles and pinholes in places, probably a little resin. Otherwise, the shape is already well-established.

Bille: Carboniferous period at that is, then only on top of, from below I'm didn't arrange. but perhaps little and or be too hard core, we'll see next time how so will go against. Ted eye do see photo, kernel already is ready, is that a board 165x50. Kernel is less than 1 cm. So it radial I'll do fr...

Hello, thereabouts that all do not understand therefore I'm install new translator so perhaps it will be better:) St. in one's own line boards just so really about 50% and tomatoes stoped:( is that a damage, because by now board don't try out:( At our place is already cold:) Next time will result be...

Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... ... Unclear what you are intending here : Did you WANT -- 6 cm deflection, and got 2.8 cm instead ; or other ... ? Bille Yes of 6 cm 2.8 cm. Next time ladies around the hill more...

Well done, complications were male, two holes on the bottom and what I regret most of deflection of 6 cm is 2.8 cm ..... some photos and perhaps better next time