We sell two types of belt hooks for single 40mm webbing or double 25mm webbing.tautologies wrote:will this setup work with a naish harness?
DYNABAR is compatible with all harnesses equipped with spreader bar pull down webbing.Krazedkiter wrote:Do any of the Dynabars come with the second bottom strap attachment like the Mystic harness has? I beleive they call it the spreader bar down system. Works wonders to keep the bar/pad from flipping up on you.
Hi Buzz, you can drill the holes and insert a 6mm dyneema but take care of sharp edges that cuts the dyneema very quickly (we use PA bushing to protect).buzzz wrote:one end of the freeride slider bar on my dynabar (V5) broke off fm the weld - it was the 'freeride' slider with the kink in it which I don't really like for wave kiting ... thinking of getting the other end drilled out, and try & find some dyneema here instead - think it's about 6mm - do you know ?
should work ... can't see why not - whatyareckon ?
does the dyneema need a different type of 'pully' on the bottom of the hook, or will the old V5 one still work fine ?
I've got a fixed Dakine bar I can use in the meantime - but dont wanna go back to fixed after the freedom of the dynabar - greeeat product imo
*think I'm just about to order the V7 fm Jaystore in Italy direct - 99euro - $130 + whatever postage is to Thailand (not much i hope) - thats for the full kit ... only problem is customs here might hit me a bit ...
Users browsing this forum: arjas, Billtx, Bing [Bot], Blackened, bshmng, CaptainKook, Carlos_C, drone, duddd, elrizo, evan, FunOnTheWater, ham-er, Hessel, IDAVIS, Kitemenn, Leon van Bergen, mede, nixmatters, Peachez54, Pepijn, Regis-de-giens, SolarSet, suisd12, tilmann, Turbaani, Ventum, Yahoo [Bot] and 476 guests