Jay XTC Flextech 2.0 harness

[plummet]

So I took a punt and order the new Jay harness,

Second session today. 15-40 knots on the 8m.

Harness works well and doesn't give the normal rib squeeze when super over powered. Had a little bit of discomfort in the back. But it was pretty crazy conditions.
First time on a sliding rope. Feels a bit weird when tacking powered upwind but does feel nice going down the line.

One little teathing issue. The bottom strap is too short and makes it a pain in the arse to put the harness on without pulling the strap out.

IMG_1677.JPG (161.08 KiB) Viewed 1865 times

IMG_1676.JPG (181.86 KiB) Viewed 1865 times

IMG_1675.JPG (132.71 KiB) Viewed 1865 times

IMG_1674.JPG (164.12 KiB) Viewed 1865 times

[Kamikuza]

Is that the one with no water absorbent materials? Is it the rigid one?

[LetsFlyaKite]

Is that the one with no water absorbent materials? Is it the rigid one?

Psh.... when you look at the picture you can clearly see it's rigid, just like every single Jay XTC harness is rigid.

[Kamikuza]

Is that the one with no water absorbent materials? Is it the rigid one?

Psh.... when you look at the picture you can clearly see it's rigid, just like every single Jay XTC harness is rigid.

O RLY

http://www.jaystore.eu/index.php/catego ... bs-harness

Jackass strikes again

[LetsFlyaKite]

Jackass strikes again

Read everything I just wrote again. I said Jay XTC harness. You know how to read right?

[Kamikuza]

Jackass strikes again

Read everything I just wrote again. I said Jay XTC harness. You know how to read right?

Saved by the C I misread your post and was too lazy to search the Dynabar site for the info, and just asked here. You got me

[jaystore]

So I took a punt and order the new Jay harness,

Second session today. 15-40 knots on the 8m.

Harness works well and doesn't give the normal rib squeeze when super over powered. Had a little bit of discomfort in the back. But it was pretty crazy conditions.
First time on a sliding rope. Feels a bit weird when tacking powered upwind but does feel nice going down the line.

One little teathing issue. The bottom strap is too short and makes it a pain in the arse to put the harness on without pulling the strap out.

IMG_1677.JPGIMG_1676.JPGIMG_1675.JPGIMG_1674.JPG

We know about this issue and it is due to the XC dynabar who requires a 180 degrees turn of the hook buckle to attach to the dyneema loop. With the XT dynabar the hook buckle turns only 90 degrees and works fine. We also see that your harness is configured to fit M size and you should verify how much distance you have between webbing buckle and dynabar XC loop attachment. If it is more than 8cm then you could use the other webbing we supplied with the harness.
The xtc harness design allows easy replacement of webbings, we will send you email with instructions.
Check also FB technical blog https://m.facebook.com/groups/309135659 ... =bookmarks
Another simple solution is to attach the 25mm webbing to the same slot as the 38mm webbing, this way the hook buckle can turn 180 degrees.
.

[plummet]

Cheers Jay store guys I'll give that a go.

[LetsFlyaKite]

Jackass strikes again

Read everything I just wrote again. I said Jay XTC harness. You know how to read right?

Saved by the C I misread your post and was too lazy to search the Dynabar site for the info, and just asked here. You got me

Yes, and I have gotten you every other time before this too. The only difference this time is you recognize it.

But it's ok, because I'm just going to forget about it like it never happened. But from now on i'm going to want better treatment around here since now we know who's right about all this. And I want all this critisizing of my posts to stop.

Have a good day

[Kamikuza]

Yes, and I have gotten you every other time before this too. The only difference this time is you recognize it.

But it's ok, because I'm just going to forget about it like it never happened. But from now on i'm going to want better treatment around here since now we know who's right about all this. And I want all this critisizing of my posts to stop.

Have a good day

Keep dreaming, snowflake