Forum for kitesurfers
-
alford
- Very Frequent Poster
- Posts: 816
- Joined: Thu Feb 25, 2016 7:53 pm
- Gear: all brands
- Brand Affiliation: None
-
Has thanked:
101 times
-
Been thanked:
46 times
Postby alford » Fri Dec 07, 2018 8:40 pm
@ Regis, very clever rope spreader bar. Was it adapted from a Dakine Maniac?
-
Attachments
-
- Capturemm.PNG (238.08 KiB) Viewed 646 times
-
badgb21
- Very Frequent Poster
- Posts: 659
- Joined: Mon Jun 16, 2003 8:55 am
- Favorite Beaches: High Pines - Duxbury
Chapin/Mayflower Cape Cod
Langebaan
Cape Verde
- Gear: None
- Brand Affiliation: None. - The words of the prophets are written on the forum “walls”-
- Location: Hants UK
-
Has thanked:
34 times
-
Been thanked:
29 times
Postby badgb21 » Fri Dec 07, 2018 9:58 pm
Yep, if you want a cheap solution, as below and link.
(We used to use a cut down windsurf harness line, for a similar item);
https://www.24-7boardsports.com/kitesur ... k-tickler/
mikelet wrote: ↑Fri Dec 07, 2018 7:33 pm
You don't need any carabiner or other complicated solutions....
Seems like you need my " IDD " system
Inverted Donkey Dick....
You only need a one end spliced spectra rope (i.e. = you can use some old pigtail ) and a piece of PU tube ....
Since i ride with Dakine harness i attach the IDD to the bridge of the hook , but i also used it with other harnesses in the past attaching it to the center of the spreader bar just make a large tube ....
Remove the original donkey dick from your CL ...and ready
I use this system for many years now ,and never have a problem.... ,you have completly freedom of your CL rotating sideways in your hook ...
Carabiners , Rings, and others tends to deform and tear apart your CL in no time, since all the load of the kite it's at one narrow point in the middle of the CL ...
-
clint2070
- Very Frequent Poster
- Posts: 692
- Joined: Fri Jun 22, 2012 5:40 am
- Local Beach: Strand,Tourmaline,Stinkz,Belmont,Seal.
- Favorite Beaches: C St, Naish beach, tourmaline,Strand, cabarete, San Quintin, La Ventana,Rauls,Nungas,Mancora,
- Style: surf, freeride
- Gear: Naish, Firewire, ride engine,Ford,liquid force, Zeeko.Tomo,
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
8 times
Postby clint2070 » Sun Aug 23, 2020 6:02 pm
alford wrote: ↑Fri Dec 07, 2018 8:40 pm
@ Regis, very clever rope spreader bar. Was it adapted from a Dakine Maniac?
I had one of those. It was horrible and only lasted a week ! haha
Return to “Kitesurfing”
Who is online
Users browsing this forum: Baidu [Spider], bittersvolcom, bragnouff, bshmng, crosisca, DanielorDani, Exage, Google [Bot], grigorib, jjm, Kemperman, plasma180, rnelias, rStorms, Windwarrior, Xtream and 436 guests