Discussion about rocker, concave and fins...
Posted: Sun Jan 06, 2013 10:58 pm
Not much action on the forum these days and given the fact that I am planning to prepare a couple of templates this winter and vacuum bag outside this summer, I thought that a discussion on the impact of rocker, concave and fins would help me understand more kiteboard designs and hopefully help me improve the quality of my first boards...
I have some wakeboard boots and would like to build a board that will be adequate to ride in relatively strong conditions (overpowered). So my question is what, between the rocker, the concave and the fins, has the biggest impact on the ability of a rider to keep its edge (and ultimately jump to decent heights).
Worst case scenario I will copy my Cabrinha Custom board but I am still curious of your opinions on this subject.
Thanks for your help.
Dany
I have some wakeboard boots and would like to build a board that will be adequate to ride in relatively strong conditions (overpowered). So my question is what, between the rocker, the concave and the fins, has the biggest impact on the ability of a rider to keep its edge (and ultimately jump to decent heights).
Worst case scenario I will copy my Cabrinha Custom board but I am still curious of your opinions on this subject.
Thanks for your help.
Dany