Here you can exchange your experience and datas about your home build boards
-
shawn13
- Very Frequent Poster
- Posts: 811
- Joined: Tue Sep 04, 2012 3:21 pm
- Local Beach: Cherry Beach, Toronto
Sherkston, Lake Erie
Wasaga, Lake Huron
- Favorite Beaches: In Order:
Mauritius, Soma Bay, Egypt/ Cape Town, SA/ Cayo Guillermo, Cuba/ Sherkston, Canada/ El Gouna, Egypt/ Paje, Zanzibar/ Oliphant, Canada/ Kalpitya/ Dakhla, Morocco/ Boracay, Philippines/ Sri Lanka/ Wasaga Beach, Canada
- Style: Freeride/Race
- Gear: Cabrinha
- Location: GLOBAL
-
Has thanked:
0
-
Been thanked:
2 times
-
Contact:
Postby shawn13 » Sun Nov 02, 2014 9:44 pm
Im about to do the final coat of finish on my boards before I paint.
I went to the local shop looking for some fairing filler to smooth out the ripples in the fiberglass. They offered me two options. Someone else recommended 410 microlight fairing compound from west systems. Ive also used microballoons to finish the foam before i glassed. Im not sure which option to go with. Here are the two from the store. Can anyone recommend some info in what i should use?
Quick application, easy to sand, prepping for paint.
-
tkettlepoint
- Very Frequent Poster
- Posts: 782
- Joined: Sun Feb 12, 2006 8:16 pm
- Gear: Jellyfish boards custom boards
- Brand Affiliation: Jellyfish Boards
- Location: Kettle Point Ontario Canada
-
Has thanked:
0
-
Been thanked:
0
Postby tkettlepoint » Mon Nov 03, 2014 12:40 am
Shawn any 2 part auto body pulling for finishing will work.. I get mine at car quest for iceing the board for imperfections , I also use a high build primer to help the small stuff too.
terrie
www.jellyfishboards.com
-
shawn13
- Very Frequent Poster
- Posts: 811
- Joined: Tue Sep 04, 2012 3:21 pm
- Local Beach: Cherry Beach, Toronto
Sherkston, Lake Erie
Wasaga, Lake Huron
- Favorite Beaches: In Order:
Mauritius, Soma Bay, Egypt/ Cape Town, SA/ Cayo Guillermo, Cuba/ Sherkston, Canada/ El Gouna, Egypt/ Paje, Zanzibar/ Oliphant, Canada/ Kalpitya/ Dakhla, Morocco/ Boracay, Philippines/ Sri Lanka/ Wasaga Beach, Canada
- Style: Freeride/Race
- Gear: Cabrinha
- Location: GLOBAL
-
Has thanked:
0
-
Been thanked:
2 times
-
Contact:
Postby shawn13 » Tue Nov 04, 2014 1:36 pm
tkettlepoint wrote:Shawn any 2 part auto body pulling for finishing will work.. I get mine at car quest for iceing the board for imperfections , I also use a high build primer to help the small stuff too.
terrie
www.jellyfishboards.com
Ok great. Thnaks. I bought the above 3m marine and will test it out tonight.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 133 guests