Here you can exchange your experience and datas about your home build boards
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Tue Oct 11, 2016 8:59 am
I think you'll need to glass it. Top and bottom with some light FG, duno 120grams? Less? More?
The flex is from narrow strips, I think. For example, I have 1500x420x12mm Paulownia plank which is impossible to bend with bare hands. But, the strips are more like 100-150 wide. Hence only a few wood strips.
If you opt for 200grams UNI directional FG, than you might build a slight rocker. It is not that hard and one could do with a hand layup.
D.
PS
The original Alaia is built from 2 wood pieces (I think, can't remember 100%), and it has only slight flex. 25mm thick at least in the middle.
-
Olivier D
- Medium Poster
- Posts: 155
- Joined: Sun Mar 20, 2011 3:52 pm
- Gear: Epic Screamer 2010 9m
Slingshot Lunacy
- Brand Affiliation: EPIC
-
Has thanked:
0
-
Been thanked:
1 time
Postby Olivier D » Tue Oct 11, 2016 9:23 am
Thanks down under for your quick response.
Any tips or tutorial on how to glass an Alaia?...
-
Olivier D
- Medium Poster
- Posts: 155
- Joined: Sun Mar 20, 2011 3:52 pm
- Gear: Epic Screamer 2010 9m
Slingshot Lunacy
- Brand Affiliation: EPIC
-
Has thanked:
0
-
Been thanked:
1 time
Postby Olivier D » Wed Oct 19, 2016 1:07 pm
-
Olivier D
- Medium Poster
- Posts: 155
- Joined: Sun Mar 20, 2011 3:52 pm
- Gear: Epic Screamer 2010 9m
Slingshot Lunacy
- Brand Affiliation: EPIC
-
Has thanked:
0
-
Been thanked:
1 time
Postby Olivier D » Wed Oct 19, 2016 1:08 pm
downunder wrote:I think you'll need to glass it. Top and bottom with some light FG, duno 120grams? Less? More?
I really think I have to glass it! Do you think one layer of FG will be enough? Why not simple epoxy resin?
-
RalfsB
- Frequent Poster
- Posts: 267
- Joined: Mon Jan 09, 2012 2:45 pm
- Kiting since: 2009
- Local Beach: Beaches close to Riga, Latvia
- Style: Freeride
- Gear: Kites: Ozone, Naish, HQ4, Gin; Boards: Gong and Alpine foil, Machado Moonbeam, a bunch of boards that I shaped
- Brand Affiliation: None
- Location: Riga, Latvia
-
Has thanked:
45 times
-
Been thanked:
26 times
Postby RalfsB » Wed Oct 19, 2016 2:08 pm
Olivier D wrote:downunder wrote:I think you'll need to glass it. Top and bottom with some light FG, duno 120grams? Less? More?
I really think I have to glass it! Do you think one layer of FG will be enough? Why not simple epoxy resin?
I have glassed mine with one layer 100g fiberglass cloth / epoxy on both sides; has been strong enough and survived several years of riding. I don't think that fiberglass should be skipped, simple epoxy will be much weaker.
-
Mossy 757
- Very Frequent Poster
- Posts: 1860
- Joined: Fri Sep 11, 2015 5:10 pm
- Local Beach: First Landing State Park, Virginia Beach Oceanfront
- Style: Kitefoil
- Gear: Delta Hydrofoil and board. Cabrinha Velocity 9m, Flysurfer Sonic2 11m, Ozone R1V2 15m
-
Has thanked:
41 times
-
Been thanked:
71 times
Postby Mossy 757 » Wed Oct 19, 2016 2:21 pm
Olivier D wrote:Hi guys,
Short update on first Alaia
14632833_10154365232086141_5866228089945529591_n.jpg
IMG_2542.JPG
IMG_2543.JPG
IMG_2541.JPG
Looks amazing! I'm a huge fan of just the oil finish, but I know with kite power that's a riskier proposition...that thing has such beautiful grain, though, seems a shame to cover it up with nasty yellow glass :-/
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Wed Oct 19, 2016 2:32 pm
Olivier,
sorry, didn't see your post. 100-120grams is a super fine glass end will be ok. How to, duno. Many ways to skin a cat.
Mossy, none of my boards are yellow(ish). Entropy Super Sap CLR all the way. The West System is yellow because of the hardener.
Hope this helps a bit.
-
Olivier D
- Medium Poster
- Posts: 155
- Joined: Sun Mar 20, 2011 3:52 pm
- Gear: Epic Screamer 2010 9m
Slingshot Lunacy
- Brand Affiliation: EPIC
-
Has thanked:
0
-
Been thanked:
1 time
Postby Olivier D » Wed Oct 19, 2016 3:20 pm
Thanks for your messages!
So you think one layer of 100-120g of FG will be enough?
The board is 18mm thick max. I think it's too weak and I really don't want to break it.
I've looked up some tutorials over the net on how to glass it. Seems quite easy. Just wondering how to dispose properly the FG on the round sections (tail and nose) ?
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Thu Oct 20, 2016 2:25 am
No need for for tail and nose, there is no benefit. If glass done correctly, should be fine but in reality if you break it you'll know for sure for next for time.
-
RalfsB
- Frequent Poster
- Posts: 267
- Joined: Mon Jan 09, 2012 2:45 pm
- Kiting since: 2009
- Local Beach: Beaches close to Riga, Latvia
- Style: Freeride
- Gear: Kites: Ozone, Naish, HQ4, Gin; Boards: Gong and Alpine foil, Machado Moonbeam, a bunch of boards that I shaped
- Brand Affiliation: None
- Location: Riga, Latvia
-
Has thanked:
45 times
-
Been thanked:
26 times
Postby RalfsB » Thu Oct 20, 2016 7:42 am
Olivier D wrote:So you think one layer of 100-120g of FG will be enough?
The board is 18mm thick max. I think it's too weak and I really don't want to break it.
I've looked up some tutorials over the net on how to glass it. Seems quite easy. Just wondering how to dispose properly the FG on the round sections (tail and nose) ?
From web resources I learned a lot from
http://www.surfersteve.com/videos.htm. If you think one layer of fiberglass may be not enough, you can put two layers in areas that could be the most prone to breaking: the middle of the bottom where the board is thin and there is a lot of stress and in the deck area where you would be standing. For an alaia there is no need to wrap glass around edges; it makes glassing easier. Just cut the cloth and put it on the board where it needs to be, pour epoxy and even it out so that it soaks the cloth. Do not put too little, otherwise lots of air bubbles will be coming, do not put too much so that cloth starts to float. In few hours you can apply yet another layer of epoxy coating, before that check if there are any bubbles and use a knife or a needle to get rid of them, the top coat of epoxy will fill and hide those spots.
Regarding the color -- it really depends on the hardener. The one I am using is bluish/greenish but quite transparent, looks very nice on boards.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 152 guests