Same construction as my bigger boards, i.e. ABS rails and spine, foam core, glass reinforcement.
Size is 98cm x 31cm, outline is a fairly standard board shape, static rocker will be about 3cm.
Thickness is going to be 10mm in the centre, 5mm on the rails (thickness of the ABS). The tips will be just the 5mm ABS which will hopefully make them nice and flexy.
Layup will be from top to bottom:
- 120gsm glass (90 gsm 0 deg, 30gsm 90 deg)
graphics
220gsm alutex (+45 deg, -45 deg)
10mm divinycell H80
220gsm alutex (+45 deg, -45 deg)
graphics
120gsm glass (90 gsm 0 deg, 30gsm 90 deg)
0.8mm P-Tex base
I got the ABS back today. This is going to be fun!