Contact   Imprint   Advertising   Guidelines

Simple Foilboard?

Here you can exchange your experience and datas about your home build boards
ladomi
Medium Poster
Posts: 71
Joined: Mon Feb 05, 2007 8:26 pm
Brand Affiliation: None
Location: Vermont
Has thanked: 5 times
Been thanked: 2 times

Simple Foilboard?

Postby ladomi » Thu Jun 28, 2018 8:55 pm

I'd like to build a cheap, easy, no frills foilboard. I have a SS hover glide and am a beginner (foiler and builder). Can it be as simple as a piece of marine plywood with t-nuts to attach the foil? Any advice would be appreciated.

Jyoder
Very Frequent Poster
Posts: 573
Joined: Thu Jul 20, 2017 8:31 pm
Kiting since: 2015
Local Beach: Chesapeake Bay (Annapolis area)
Gear: Zeeko bullet Foil and DIY board
Brand Affiliation: None
Location: Annapolis, Maryland
Has thanked: 18 times
Been thanked: 167 times

Re: Simple Foilboard?

Postby Jyoder » Fri Jun 29, 2018 1:20 am

It can be as simple as fiberglassing a piece of plywood, but it will be much harder to learn on. I did it and it took a while to learn, but it was still a fun experience. If you have time and patience, go for it.

Jyoder
Very Frequent Poster
Posts: 573
Joined: Thu Jul 20, 2017 8:31 pm
Kiting since: 2015
Local Beach: Chesapeake Bay (Annapolis area)
Gear: Zeeko bullet Foil and DIY board
Brand Affiliation: None
Location: Annapolis, Maryland
Has thanked: 18 times
Been thanked: 167 times

Re: Simple Foilboard?

Postby Jyoder » Fri Jun 29, 2018 1:21 am

I know of someone who almost lost their foil when their ply board broke at the front edge of the foil plate. Gotta make sure you glass it strong enough.

patrelsa
Rare Poster
Posts: 42
Joined: Sat Mar 21, 2015 2:25 pm
Gear: kite
Brand Affiliation: None
Has thanked: 8 times
Been thanked: 4 times

Re: Simple Foilboard?

Postby patrelsa » Fri Jun 29, 2018 1:28 am

birch plywood,drill 4 holes,polyeurethane,lasted six months of heavy use and no signs of breaking

User avatar
junebug
Frequent Poster
Posts: 439
Joined: Sat Jan 04, 2014 4:14 pm
Kiting since: 2006
Weight: 195 lbs
Style: Freeride Twintip, Strapless Foil
Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
Brand Affiliation: None
Has thanked: 42 times
Been thanked: 63 times

Re: Simple Foilboard?

Postby junebug » Fri Jun 29, 2018 2:12 pm

I’ve been foiling for a couple of years, and I want to build a paipo foil board. I’m thinking about making it 42x20 inches made with strips of paulownia. I’m either going to make it flat or try to use a steam box to add some rocker.

My question — What is the minimum thickness I should make it to not have to worry about splitting it? I’m going to be riding strapless and no jumping.

Sorry for the dual posts (here and in the hydrofoil builders thread), but I wasn’t sure where I should put this.

User avatar
jumptheshark
Very Frequent Poster
Posts: 2169
Joined: Fri Nov 10, 2017 6:36 pm
Local Beach: Shhhhh
Favorite Beaches: Nude
Gear: The good stuff
Brand Affiliation: None
Has thanked: 387 times
Been thanked: 707 times

Re: Simple Foilboard?

Postby jumptheshark » Fri Jun 29, 2018 2:22 pm

I think the minimum thickness you can get away with depends a lot on the glassing schedule of the plate and surrounding area. My board is commercial hardwood ply with a melamine top and bottom sheet and its only about a cm thick. I ride strapless, don't jump but carve a big wing around as hard as I can and have had no issues. Simple stainless T nuts as hardware. Adequate flotation and plate competence are pretty much the only real requirement. Size, rocker, visibility, etc can all be pretty variable and you still have a great board. For learning I would say go big with the intent to chop it down as you progress.

Jyoder
Very Frequent Poster
Posts: 573
Joined: Thu Jul 20, 2017 8:31 pm
Kiting since: 2015
Local Beach: Chesapeake Bay (Annapolis area)
Gear: Zeeko bullet Foil and DIY board
Brand Affiliation: None
Location: Annapolis, Maryland
Has thanked: 18 times
Been thanked: 167 times

Re: Simple Foilboard?

Postby Jyoder » Fri Jun 29, 2018 2:35 pm

Hover glide is heavy. Wood is heavy. If you don’t add a big deckpad for flotation it will sink or at least sit low in water and be hard to find/see after a crash.


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 54 guests