Here you can exchange your experience and datas about your home build boards
-
Demy182
- Rare Poster
- Posts: 13
- Joined: Wed May 23, 2018 4:26 pm
- Local Beach: puntapellaro
- Gear: switch legacy
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
0
Postby Demy182 » Sat Oct 06, 2018 9:30 am
where can i buy ABs or Pvc for rails in europe?
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Sat Oct 06, 2018 3:07 pm
Hi,
I would strongly suggest making a mold for PU rails.
Way more cheaper. Search this forum for old posts.
D.
-
rynhardt
- Very Frequent Poster
- Posts: 980
- Joined: Wed Sep 11, 2013 3:51 pm
- Local Beach: Langebaan
- Favorite Beaches: Langebaan
- Style: Freeride
- Gear: Cloud C2 17
Hoff Twinwave
- Brand Affiliation: None
- Location: Johannesburg, South Africa
-
Has thanked:
26 times
-
Been thanked:
30 times
Postby rynhardt » Sat Oct 06, 2018 7:11 pm
Try junksupply.
http://www.junksupply.com/product-categ ... mateirals/
Otherwise try any signage supplier that also does acrylics or polycarbonate.
-
phuqit
- Rare Poster
- Posts: 36
- Joined: Thu Jun 21, 2018 2:03 pm
- Local Beach: Kaunas
- Gear: Flusurfer Soul 12, 21m
Flysplit 2 board
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby phuqit » Sat Oct 06, 2018 9:06 pm
I've had pretty good results with vacuum resin infusion and a simple fiberglass rope around the perimeter - it's pretty tough and you can infuse it in one go. Your mileage may vary though
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 157 guests