Deep KF box sizes

[Blackrat]

Anyone got the dimentions for the deep KF box mainly used in SUP and wind foils

[faklord]

Does this help?
http://kiteforum.com/viewtopic.php?f=19 ... ns#p915327

[Blackrat]

Ta but no

As far as I know it's only fone who uses it?

[Peter_Frank]

Ta but no

As far as I know it's only fone who uses it?

What do you need ?

faklord linked to the very dimensions of the deep tuttle box, excellent

Tuttle comes in three sizes, 49 and 60 and 67 mm front edge.

Or do you seek the OUTER dimensions of typical offered deep tuttle box's ?

PF

[Blackrat]

KF box ...

[Peter_Frank]

KF box ...

Ha haa sorry, we got fooled reading without reading what you wrote

F-One is the only one I know about, using deep KFBox.

Will check later on my stationary if I got the dimensions, can not remember

PF

[bacon2109]

You can email Ketos for info, since KFBox have no licence..... if i'm correct
KFbox , not the deep KFbox and other box spec here (image in thread); http://kitefoil.forumactif.org/t1826-pl ... er-integre

[renaudbarbier]

forget deep kf box, use deep tuttle or probox
more std.

[Blackrat]

Tuttle box is too narrow , made for wind surfers
Don't know anyone using probox ?

I think I'm gonna use KF box for the sup mast

[Peter_Frank]

You can email Ketos for info, since KFBox have no licence..... if i'm correct
KFbox , not the deep KFbox and other box spec here (image in thread); http://kitefoil.forumactif.org/t1826-pl ... er-integre

KFBox standard is 40 mm deep, outside measurement, around 37-38 mm inside.

I did not have the drawing of the "Deep" KF Box, but if some know the (inside) height F-One uses, that is all that is needed, as it is 6 degrees on the sides, and 25 x 120 mm on the base, no matter what the inside depth is.

Is it 55 or 60 mm or what ?

PF

PS: I only know of Sroka that uses ProBox, but Taaroa also used ProBox, dont know if they still do ?