Contact   Imprint   Advertising   Guidelines

Moses 2018

A forum dedicated to Hydrofoil riders
TomW
Very Frequent Poster
Posts: 3585
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Lomma
Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 53 times
Been thanked: 193 times

Re: Moses 2018

Postby TomW » Mon Sep 10, 2018 3:47 pm

Ive been meaning to put on the 590 again, but every time i get to the beach the wind is pretty light and theres a lot of sea grass. We get this sea grass called Eel Grass.
6529.jpg
and then individual fronds get hung up on front wing- lots of them, and also collect on the mast. I try to get them off by jerking side-by side, but they just stick on.
The 590 collects so much and stops flying.

grigorib
Very Frequent Poster
Posts: 4147
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 691 times

Re: Moses 2018

Postby grigorib » Mon Sep 10, 2018 7:55 pm

I'm curious how sales of 558, 550 and 548 are going. I know many folks were swearing by those wings but in means of voting with a wallet it'd be interesting to know what's up with those
Last edited by grigorib on Mon Sep 10, 2018 9:29 pm, edited 1 time in total.

Foil
Very Frequent Poster
Posts: 1447
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2000
Weight: 91kg
Local Beach: New Brighton near Liverpool. Open sea with big low tide deep lagoon
and regular at Rhosneigr and Newbrough on Anglesey
Favorite Beaches: New Brighton, Rhosneigr, Fleetwood, Newbrough, Blackrock sands
lake Como (Italy) El Medano
Style: kite foiler since 2017 Ttip since 2000
Gear: My rule to gear choice is "IF IT DONT BOOST ITS NO USE"
Groove Skates 110cm 2022 editions
kraken mast systems 103k and 93k.
Kraken fuse 703k
Duotone SLS Evo's -- 11mtr/9mtr/7mtr/6mtr/ 4mtr RRD.
Duotone 2022 click bars x2,my own custom made lines fitted,
(modified lines now available for the flite99 shod duotone bars)

Bar lines made up to any length in a choice of strengths, power lines, trim lines, pigtails, leader lines, bridal lines, elasticated lines, I make and fit them all, free fit and tune service,
quick turnaround,drop me a message, find me on messenger, Colin Moore.
Brand Affiliation: None
Has thanked: 116 times
Been thanked: 324 times

Re: Moses 2018

Postby Foil » Mon Sep 10, 2018 8:16 pm

I am with the folks who believe you need a fast wing as well as the wave wing 633.
which fast wing is personal choice, all those wings above are great, all are fast.(I have in the recent past owned them all)
But the race wing 637 feels faster and smoother at speed, the only downside for me are the sharpish ends and the sudden stall at what is quite a slow speed but it still makes me wince just before it stalls and drops like a stone, That's not a bad thing as it makes me keep the speed up in the turns.
For massive open stretches of flattish open water in strong winds you can put on a much bigger kite and really push your speed and upwind angles, gusts are no problem as the wing rides so level, you just accelerate.
so only owning a 633 wave wing would not suit all conditions and vice versa.
And another good thing about owning both the 633 and the 637 is you don't need to change mast position, they both work off the same position.

JBo
Medium Poster
Posts: 76
Joined: Sun Aug 24, 2003 5:21 pm
Has thanked: 0
Been thanked: 0

Re: Moses 2018

Postby JBo » Wed Sep 26, 2018 5:31 am

Need some help with my new Moses Onda 91 position. I am currently riding the small 3'6 dwaftcraft and wondering the ideal mast position relative to the front foot. I would appreciate any measurements from the back of the board to the back edge of the pedestal and to the center front foot position. Worried the board might too small?

Sbrinckman
Medium Poster
Posts: 80
Joined: Thu Jan 02, 2014 3:54 pm
Local Beach: IJmuiden
Marina muiderzand
Favorite Beaches: Taiba
Cabarete
Mauritius
Sal
Style: wave and foil
Gear: Aluula Roam and Crave
Peak 5
Maverick kite
Arribarriba wave board
DSD Stallion wave board
Sabfoil T22, T38, 633 wing, 899, 1100 wing
F-one 100L, 85L wing board, 1240 phantom foil
Triton T1 monowing
AK durable 65L wingboard
Brand Affiliation: None
Has thanked: 8 times
Been thanked: 19 times

Re: Moses 2018

Postby Sbrinckman » Wed Sep 26, 2018 5:45 am

I ride this setup strapless with mast all the way back. Have not tried straps yet. Tou can allways shim rearwing or mast fuselage connection.

TomW
Very Frequent Poster
Posts: 3585
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Lomma
Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 53 times
Been thanked: 193 times

Re: Moses 2018

Postby TomW » Wed Sep 26, 2018 9:48 am

JBo wrote:
Wed Sep 26, 2018 5:31 am
Need some help with my new Moses Onda 91 position. I am currently riding the small 3'6 dwaftcraft and wondering the ideal mast position relative to the front foot. I would appreciate any measurements from the back of the board to the back edge of the pedestal and to the center front foot position. Worried the board might too small?
You should be fine. Put the mast all the way back.
My pedestal is about 90mm from the tail, the holes 135mm from the tail. I use a rear foothook- which i dont really use so could remove it. I positioned the mast to be able to the the rear foothook.
without it I could have moved another 50mm back.

grigorib
Very Frequent Poster
Posts: 4147
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 691 times

Re: Moses 2018

Postby grigorib » Wed Sep 26, 2018 12:45 pm

JBo wrote:
Wed Sep 26, 2018 5:31 am
Need some help with my new Moses Onda 91 position. I am currently riding the small 3'6 dwaftcraft and wondering the ideal mast position relative to the front foot. I would appreciate any measurements from the back of the board to the back edge of the pedestal and to the center front foot position. Worried the board might too small?
I’m riding 42” Dwarfcraft 2016 and with 633 wing my back foot is over the rear mast plate bolt (4.5 position on my board)
With 590 I move the mast so my big toe is over rear mast plate bolt (7.5 position on my board)

My back foot is always back to the kicker and front foot is just behind frontmost center strap attachment hole. I guess that will depend on your height too.

On pictures below is my mast position for 590 wing (at 7.5). The 633 mast position is 4.5.
The mast I have in the picture and my Moses masts match rear hole/edge position, just for a confirmation. No shimming either.

I ride strapless but my feet do have a sweet spot on the board and I rather move the mast by 1cm to fine tune position rather than stepping elsewhere
Attachments
BF165DE6-47DD-49D3-9624-DEA5D4AD4530.jpeg
69163020-E1B3-4F5D-9F5A-EFF292827199.jpeg
91FA3237-D916-47C0-BD8A-8FDCEF415D17.jpeg

keskopesko
Rare Poster
Posts: 25
Joined: Thu Oct 13, 2016 7:55 am
Local Beach: Grado, Seča Portorož
Favorite Beaches: Lago Santa Croce I, Pelješac Cro, Bol Cro
Gear: Moses Onda, 590
Ozone Chrono R1V2, Slingshot SST
Brand Affiliation: Moses, Ozone
Has thanked: 4 times
Been thanked: 0

Re: Moses 2018

Postby keskopesko » Wed Sep 26, 2018 2:02 pm

Any idea what will be with Comet 111 in 2019?
Looks that's Mikes is flying away in comp class?

Any insider info?

Tnx,
Ales

TomW
Very Frequent Poster
Posts: 3585
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Lomma
Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 53 times
Been thanked: 193 times

Re: Moses 2018

Postby TomW » Wed Sep 26, 2018 9:00 pm

I measured my boards. And my foot placement strapless in relation to mast. I can do this by looking at discolouration of my white deck pad. My front foot is generally about 50mm more forward with the 633 than 590.

Dave K
Frequent Poster
Posts: 355
Joined: Tue Aug 26, 2003 11:49 pm
Kiting since: 2001
Local Beach: Outer Banks
Style: Knee friendly strapless kite/wing foil
Gear: 10 m Airush Ultra / 7M Switch Helium, 5M RRD Passion, 120cm Groove Skate. Duotone Slick SLS 6/5/4/3m, Cabrinha Code 5’0”/78l wing board, Gong Veloce V2 L, XL., XXL, Gong Fluid V2 L, pro Fluid 42cm/freestyle 44 stabilizers, Gong HM 85cm V2 carbon mast, 75cm Al mast. Foil Drive + and 40L slingshot prone foil board
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 37 times

Re: Moses 2018

Postby Dave K » Sun Sep 30, 2018 12:59 pm

New 633 Onda owner here (71cm; my riding is almost 100% shallow OBX soundside). Got mine from Adam Super at Session Sports in South Carolina. Highly recommend him. Novice coming from a 600ish sq cm RRD H-flight foil and the larger LF Happy foil board. Not much to add to the many comments on this amazing foil. Ordered a Groove Skate back on 9-7 but wasn’t sure when it would show up so I slapped together a very quick-and-dirty Franken board from a prehistoric eps-epoxy-glass kite twin tip I’ve had since 2001 (I guess that really dates me🤪). I just eyeballed and chopped, reglassed the ends and solid epoxied thrubolt holes for the mast plate. Just made sure to set the mast way back on the the board and flat sand all those razor sharp Moses trailing edges before getting wet. $20 skim board pad from Amazon. About 137 cm long, 48cm wide, 3cm thick at the center, and 4.1 kg

I had extremely low expectations on my first session; crude board, new to me foil, very first time attempting strapless water starts, 9m Best Cabo in 11-16 knots. It actually went amazingly well. I’d say I got about 40% of my water start attempts right from the get go. I wear a really low seat harness and have almost what amounts to a non flexing fused lower back so knees to my chest ain’t happening, but the foil sink rate on the Onda with my Franken board provided the needed delay time, even for this spastic oldtimer. Once up it was immediate smile face. On touch downs and short stints of surface riding this foil made my board feel surprisingly solid. I suppose the foil is providing most of the lift even with the board on the water. Heck, if I didn’t have a Groove Skate on the way (Michele said it should ship this week) I’d probably just chop another 10 cm off this beast, maybe enhance the nose scoop and be content for awhile. I think these large area foils would make a piece of curved plywood look pretty good for kite foiling! At least with decent wind

(For any of you old timer US kiteboarders, this board was originally shaped by Pete Nordby, who was killed just a year later in 2002, in a kiteboarding accident. Gear safety has come a long way since then, and I think Pete would be happy looking down seeing one his creations repurposed for active duty)
Attachments
29C2F92F-C58B-475A-BCFE-89C7B0C94095.jpeg
D744D92D-5018-4755-877D-563E252D3456.jpeg


Return to “Hydrofoil”

Who is online

Users browsing this forum: alekbelia and 170 guests