Contact   Imprint   Advertising   Guidelines

Converting surf board

A forum dedicated to Hydrofoil riders


BWD
Very Frequent Poster
Posts: 3258
Joined: Thu Jun 05, 2003 3:37 am

Re: Converting surf board

Postby BWD » Fri Jan 05, 2018 3:42 am

I just meant like what a previous poster “mopman” did to mount his foil.
Looks like nut inserts embedded in plastic/resin.
If the board is heavy glassed, a few more layers of patches and inserts mounted in strong resin/milled fiber columns that go all the way from bottom skin to deck should work.
Where boards often snap is at the front edge of the foil plate so that is where the bottom needs to be strongest. If through bolting, big washers are a good idea.
Thanks for the pictures, I think i do remember seeing that little 4’10” before.

juandesooka
Very Frequent Poster
Posts: 775
Joined: Wed Aug 29, 2012 8:05 pm
Kiting since: 2011
Local Beach: Sooke, BC, Canada
Gear: BWS / Ocean Rodeo / Stringy Foil
Brand Affiliation: None

Re: Converting surf board

Postby juandesooka » Fri Jan 05, 2018 7:35 am

BWD wrote:
Fri Jan 05, 2018 3:42 am
If through bolting, big washers are a good idea.
Yes! For my through hull DIY I used a plastic cutting board above and below, to make plates that will spread the force. This has worked fine on my kite foilboard for a year or more now. But in trying this with a SUP foil, there's a lot more forces involved. On a head high wave it broke the plastic and pulled the bolt, small washer, and a chunk of plastic right through the board. So ... next iteration, will use large washers 2" or more, or better yet, an aluminum plate on top.

Jan F2B
Rare Poster
Posts: 6
Joined: Mon Dec 11, 2017 2:48 pm
Kiting since: 2009
Gear: Flysurfer Nobile
Brand Affiliation: own business Foil2Board

Re: Converting surf board

Postby Jan F2B » Fri Jan 05, 2018 10:13 am

Image
Last edited by Jan F2B on Fri Jan 12, 2018 12:31 pm, edited 1 time in total.

TomW
Very Frequent Poster
Posts: 2167
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 135
Moses Fluente 548/550/590/330/325
North Mono 7, 9, 12
Core XR3 12m
Brand Affiliation: None
Location: Sweden

Re: Converting surf board

Postby TomW » Sat Jan 06, 2018 12:19 am

That race board is going to be a monster to learn on.
I'd convert the slingshot board.

Thomas1kite
Rare Poster
Posts: 6
Joined: Fri Jan 05, 2018 1:57 pm
Kiting since: 2013
Gear: Core kites
Brand Affiliation: None

Re: Converting surf board

Postby Thomas1kite » Sat Jan 06, 2018 11:54 am

hi guys, does anyone tried to use foil with old big three-fins raceboards such as temavento or mikeslab? I've got new race foil but dont have a proper foilboard to test it (

User avatar
Flyboy
Very Frequent Poster
Posts: 1111
Joined: Thu Oct 17, 2002 1:00 am
Kiting since: 2000
Brand Affiliation: None

Re: Converting surf board

Postby Flyboy » Sat Jan 06, 2018 6:00 pm

Thanks for the responses. My conclusion is not to mess around with my existing board, but possibly have a custom board made incorporating foil inserts. This would almost certainly be stronger/lighter than retrofitting.

User avatar
Peter_Frank
Very Frequent Poster
Posts: 8448
Joined: Wed Oct 16, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: Denmark

Re: Converting surf board

Postby Peter_Frank » Sat Jan 06, 2018 6:37 pm

Flyboy, the raceboard will by far be the best for learning, and will also be an awesome ultimate marginal wind board later, maybe impossible to beat even for advanced riders.

Your first attempts will always be pathetic - it is very very normal for everyone, no matter what - dont be discouraged by that.

I would learn to ride on that one - it has tracks now and is way easier to learn on than the smaller ones.

For an allround board for ALL conditions, the Slingshot board looks just perfect in every way, and would also be easy to learn on and can ride in quite low winds too :thumb:

But as it has not got tracks, but the raceboard has - learn on that one for now :D

The red one will be the most difficult - fine and small and fun WHEN you have learned, but will only be after a long time you will enjoy that one, short and tiny nose and no scoop, not good till you can foil consistently :roll:

8) PF

PS: To Thomas1kite, for racing these boards are too wide, and will catch when edged max and really powered....
But for learning and marginal wind, top !

Thomas1kite
Rare Poster
Posts: 6
Joined: Fri Jan 05, 2018 1:57 pm
Kiting since: 2013
Gear: Core kites
Brand Affiliation: None

Re: Converting surf board

Postby Thomas1kite » Tue Jan 09, 2018 11:36 am

Thanks Peter_Frank, I will skip this idea :) and go for proper foil racing gear

User avatar
bragnouff
Very Frequent Poster
Posts: 634
Joined: Tue May 14, 2002 1:00 am
Kiting since: 99
Local Beach: New Brighton
Gear: Alkita boards
Zeeko foil
GK Trix
Enduro9
Brand Affiliation: GK enthusiast
Location: Te Wai Pounamu
Contact:

Re: Converting surf board

Postby bragnouff » Tue Jan 09, 2018 10:44 pm

If your small surfboard is a "magic board", adding some weight for the conversion is going to alter it quite a bit. Doesn't mean it will become bad, but it might with an extra 600g. On the other hand, its compact shape would make it a good base for foiling. I'd risk it! Unlike Peter, I think being compact with low volume is better, even at early stages, than a bulky raceboard, specially if you're aiming for strapless. Provided you're not chasing extreme light winds, ...

I'm using the Zeeko Slash 5'4 convertible, and although it weighs significantly more than the surfboards I'm using or used in the past, I still like it a lot for wave riding, and it's getting a lot of use, to the point that I keep the fins on, and would typically mount my Zeeko foil on my other foiling deck, a Double Agent, so as to be able to swap quickly. Unless I'm travelling...
My point being, weight isn't necessarily an issue. But foiling on your beloved surfboard can introduce bigger risks of damage to it.

hyptocrypto
Rare Poster
Posts: 9
Joined: Sat Dec 30, 2017 2:53 pm
Kiting since: 17
Local Beach: Port Elizabeth
Style: Surf
Gear: RRD
Brand Affiliation: None

Re: Converting surf board

Postby hyptocrypto » Thu Jan 11, 2018 10:12 pm

mopman365 wrote:
Thu Jan 04, 2018 7:24 am
I did this with a surfboard, and it seems to be holding up fine. The 4 deep nuts-in-plastic-plug is also half the weight of two fin boxes.
DSC_1803.JPG
DSC_1806.JPG
DSC_1842.JPG
DSC_1872.JPG
mopman you live around jbay? Also have a Rebel I was thinking of converting into a foil board.


Return to “Hydrofoil”

Who is online

Users browsing this forum: mmac and 7 guests