A forum dedicated to Hydrofoil riders
-
geokite
- Medium Poster
- Posts: 200
- Joined: Tue Apr 18, 2006 4:40 am
- Local Beach: Silver Strand, Mission Bay
- Favorite Beaches: Sherman, Belmont
- Style: Surf, Foil
- Gear: Avoid the Triton foil board, made by Newind!
B: [Firewire SP, Kanaha MM, Triton] F: [Lift, Triton, Axis] K: [Kitech, Gin]
- Brand Affiliation: None
-
Has thanked:
74 times
-
Been thanked:
39 times
Postby geokite » Wed Sep 19, 2018 6:49 pm
Off the board, every time due to space in the car. Foil is malleted off the mast when I get home, as the Lift foil retains water between them. Yes, I do grease my bolts but having them just sit in salt water seems bad.
-
jumptheshark
- Very Frequent Poster
- Posts: 2169
- Joined: Fri Nov 10, 2017 6:36 pm
- Local Beach: Shhhhh
- Favorite Beaches: Nude
- Gear: The good stuff
- Brand Affiliation: None
-
Has thanked:
387 times
-
Been thanked:
707 times
Postby jumptheshark » Wed Sep 19, 2018 7:32 pm
Foil off the board (4 short bolts with a screw driver) and fuse off the mast (two M8 bolts with an allen key).
Both parts go into foil bags and it all packs nicely into the car/house
I get that people want to save time. Would be lovely to have a tool-less snap together system, but I can't say my life is all that bad with the set up I have. I do it so often, its routine and realistically only takes a couple min. As in two! I'd say about half of kiters I see wherever I go, take a small eternity to rig and pack up not because of their gear, but because their social/undecided/inexperienced. To be honest, I'm more than happy with how quickly my kit goes together, and kinda thrilled with how small it packs.
I have an alloy foil, but live on fresh water. For the first year I would disassemble entirely every couple weeks. Total overkill as the threads were always nicely gooped. Began to worry about wearing out the hardware so the second year I only did it once, mid season. Still loads of goop. This year I just backed the bolts off a half turn and then snugged em back up. Do a complete disassemble with storage in its case for winter and the threads will get a fresh coat of tef gel next spring. I get that it's different for those in salt water.
-
Pedro Marcos
- Very Frequent Poster
- Posts: 2185
- Joined: Mon Sep 23, 2002 1:00 am
- Brand Affiliation: None
- Location: Portugal - Algarve - Faro
-
Has thanked:
0
-
Been thanked:
5 times
Postby Pedro Marcos » Wed Sep 19, 2018 10:46 pm
I separate the foil of the board, unfortunately it doesnt fit all together inside my car.
-
ap888
- Frequent Poster
- Posts: 284
- Joined: Thu Sep 13, 2018 2:24 am
- Local Beach: Zion/K peir/Inver/Goderich
- Favorite Beaches: Good wind/Flat water/Good waves
- Style: Foil/Loops/Big Air/Strapless
- Gear: Ozone Uno V2 4m
North Neo (17) 5m
Cabrinha Drifter (16) 8m
Flysurfer Sonic 2 -11m
Moses
BWS Stallion 5’
CrazyFly Shox Custom 135
Groove Skate
Ride Engine
- Brand Affiliation: HFL
-
Has thanked:
13 times
-
Been thanked:
10 times
Postby ap888 » Wed Sep 19, 2018 11:39 pm
Never need to rinse cause only kite in fresh water...and I took out all interior in my 3 series cause kite life so I only have to unscrew the fuselage from the mast
-
jumptheshark
- Very Frequent Poster
- Posts: 2169
- Joined: Fri Nov 10, 2017 6:36 pm
- Local Beach: Shhhhh
- Favorite Beaches: Nude
- Gear: The good stuff
- Brand Affiliation: None
-
Has thanked:
387 times
-
Been thanked:
707 times
Postby jumptheshark » Thu Sep 20, 2018 1:39 am
ap888 wrote: ↑Wed Sep 19, 2018 11:39 pm
I took out all interior in my 3 series cause kite life
Nice, that's commitment.
Was thinking about it and, one thing I kinda like about how my foil breaks down is that it has flat wings. Thin pocket board, mast and foil stack so flat it would fit between the seats of a Ferrari. I should get one.
-
ap888
- Frequent Poster
- Posts: 284
- Joined: Thu Sep 13, 2018 2:24 am
- Local Beach: Zion/K peir/Inver/Goderich
- Favorite Beaches: Good wind/Flat water/Good waves
- Style: Foil/Loops/Big Air/Strapless
- Gear: Ozone Uno V2 4m
North Neo (17) 5m
Cabrinha Drifter (16) 8m
Flysurfer Sonic 2 -11m
Moses
BWS Stallion 5’
CrazyFly Shox Custom 135
Groove Skate
Ride Engine
- Brand Affiliation: HFL
-
Has thanked:
13 times
-
Been thanked:
10 times
Postby ap888 » Thu Sep 20, 2018 2:33 am
Should be getting my Moses T38 any day now so excite
Never take out my boards/foil/pump just my kite and bar not good for kite to leave in...and the foil in back keeps me from drifting which I shouldn’t be doing anyways
Plus I can fit all the gear I have in my car plus some of my bros...had no interior for couple years keeps low mileage not giving ppl rides..lol
-
Attachments
-
-
OzBungy
- Very Frequent Poster
- Posts: 2759
- Joined: Fri Oct 21, 2005 11:35 am
-
Has thanked:
6 times
-
Been thanked:
220 times
Postby OzBungy » Thu Sep 20, 2018 3:07 am
jumptheshark wrote: ↑Thu Sep 20, 2018 1:39 am
....
Was thinking about it and, one thing I kinda like about how my foil breaks down is that it has flat wings. ...
I like deep tuttle fittings for the same reason. My masts and foils slide into the back of my car and stack on top, or under, the kites, wetsuit tub etc. I would be sad if my foil maker moved to plate mounts.
-
jumptheshark
- Very Frequent Poster
- Posts: 2169
- Joined: Fri Nov 10, 2017 6:36 pm
- Local Beach: Shhhhh
- Favorite Beaches: Nude
- Gear: The good stuff
- Brand Affiliation: None
-
Has thanked:
387 times
-
Been thanked:
707 times
Postby jumptheshark » Thu Sep 20, 2018 4:26 am
I get that, but you'd survive! Besides, tuttle requires a thicker board. Thin low rocker board then mast then flat wing foil stacks about the depth of the plate width. Lies pretty flat in the bottom of the roof box. Way lower profile than a surfboard with fins. I'd bet its less than a tuttle board, mast and wing with any significant an/diherdral. Whatevs, as long as you get it to the water!
-
grigorib
- Very Frequent Poster
- Posts: 4166
- Joined: Mon Aug 01, 2016 8:12 pm
- Kiting since: 2009
- Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
- Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x
For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
- Brand Affiliation: None
-
Has thanked:
468 times
-
Been thanked:
696 times
Postby grigorib » Thu Sep 20, 2018 5:00 am
My 42” Dwarfcraft fits well on the width into the car so no disassembly needed.
-
tautologies
- Very Frequent Poster
- Posts: 10865
- Joined: Mon Feb 16, 2004 5:36 am
- Brand Affiliation: None
- Location: Oahu
-
Has thanked:
100 times
-
Been thanked:
156 times
-
Contact:
Postby tautologies » Thu Sep 20, 2018 5:18 am
I always take the foil off the board. So easy with the abracadabra system from Naish.
Return to “Hydrofoil”
Who is online
Users browsing this forum: No registered users and 180 guests