Contact   Imprint   Advertising   Guidelines

The stagnant foiler.

A forum dedicated to Hydrofoil riders


Wazza Foil
Rare Poster
Posts: 18
Joined: Sat Mar 18, 2017 12:15 am
Kiting since: 2000
Local Beach: Hams
Style: Kite surfing strapless. Foil, SUP and ka
Gear: lots
Brand Affiliation: None

Re: The stagnant foiler.

Postby Wazza Foil » Sun Oct 07, 2018 8:56 am

Plummet you seem to have made your choice on what does it for you with the underlying requirement is full on only.
Others get their kick at all different levels.

plummet
Very Frequent Poster
Posts: 6058
Joined: Sat Aug 29, 2009 11:25 pm
Kiting since: 33
Local Beach: EE
Favorite Beaches: NZ
Style: Terrain riding
Gear: Old wornout ozone.
Plummet hydrofoil and mutant
Brand Affiliation: None

Re: The stagnant foiler.

Postby plummet » Mon Oct 08, 2018 2:31 am

Haha. Yeah that's me. I'm at my happiest when it's full on. So I will always take the full on option if it's available.

I will explore the bigger wing idea though. Maybe not a full fat sup wing. But a higher aspect larger wing that will be good at speed but lenc it's self the a bit more stability

Wazza Foil
Rare Poster
Posts: 18
Joined: Sat Mar 18, 2017 12:15 am
Kiting since: 2000
Local Beach: Hams
Style: Kite surfing strapless. Foil, SUP and ka
Gear: lots
Brand Affiliation: None

Re: The stagnant foiler.

Postby Wazza Foil » Mon Oct 08, 2018 8:35 am

Plummet the Zeeko Carver wing maybe worth a try.
I bought one direct about a yr ago and did my first on the fly Jybe.
Zeeko claim it's good to 26kn but I am sure you would push it past that.

plummet
Very Frequent Poster
Posts: 6058
Joined: Sat Aug 29, 2009 11:25 pm
Kiting since: 33
Local Beach: EE
Favorite Beaches: NZ
Style: Terrain riding
Gear: Old wornout ozone.
Plummet hydrofoil and mutant
Brand Affiliation: None

Re: The stagnant foiler.

Postby plummet » Mon Oct 08, 2018 9:52 am

My current wing is loosely based on the Moses Fluente, at around 560cm2. The Zeeko Freeride wing is probably closest to what I have.

A 750 cm2 high aspect front wing might be interesting.
Attachments
19621150_1540004906073881_3461867615274677259_o.jpg

User avatar
Kamikuza
Very Frequent Poster
Posts: 5876
Joined: Fri Jan 09, 2009 4:49 am
Local Beach: Sabae Beach
Favorite Beaches: Ol' Stinky
Gear: This, that, the other

Re: The stagnant foiler.

Postby Kamikuza » Mon Oct 08, 2018 10:01 am

Today was apparently 8 knots average with gusts of 12 knots. I had an excellent time foiling around...but then, my foil has nearly 4 times the area of yours :D

User avatar
Peter_Frank
Very Frequent Poster
Posts: 8811
Joined: Wed Oct 16, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: Denmark

Re: The stagnant foiler.

Postby Peter_Frank » Mon Oct 08, 2018 2:11 pm

plummet wrote:
Mon Oct 08, 2018 9:52 am
My current wing is loosely based on the Moses Fluente, at around 560cm2. The Zeeko Freeride wing is probably closest to what I have.

A 750 cm2 high aspect front wing might be interesting.

Wings are always interesting, true :thumb:

So you seek a wing to be able to ride in marginal wind, and good upwind angles?

As if not, and for waves or maneuvers, I would choose a 750 cm2 (or bigger) low aspect, so it can hang on the wave and turn really well/narrow, instead of a high aspect.

I would say high aspect really big wings got quite limited use, they are not as fast and turn slow, but for ultimate marginal winds they are top so nothing beats these here.
Got one myself eventhough only around 800 cm2 but ok high AR, I use a lot, but I also try to ride relatively often in 6 to 7 knots with 12-13 m2 LEI kites.

Still usually change to either a lower AR wing when around 8 knots and up, or to a higher AR smaller wing if I want to go fast and high angles.


8) Peter

plummet
Very Frequent Poster
Posts: 6058
Joined: Sat Aug 29, 2009 11:25 pm
Kiting since: 33
Local Beach: EE
Favorite Beaches: NZ
Style: Terrain riding
Gear: Old wornout ozone.
Plummet hydrofoil and mutant
Brand Affiliation: None

Re: The stagnant foiler.

Postby plummet » Mon Oct 08, 2018 5:24 pm

To be honest.No I dont want to ride 6-7 knots... or sub 10 knots. Bigger faster waves riding at speed is interesting to me. Slow maneuverable wings that can't handle fast waves I am not interested in. I'd prefer to be riding a head high plus wave at speed. Below that size the waves are too close to the sub surface rocks for my liking and I dont want to risk smashing the foil. I im looking to ride the swell or larger waves deeper out to sea.


I also don't want slow and stable. I prefer fast and maneuverable with light front foor pressure. As such i've backed the aoa off the rear wing to give me that kind of ride. I makes flying foot switches hard, but I enjoy the ride better.

I'm all ears for ideas for a a wing that will give me fast, more stable, maneuverable, ride big waves at speed.

OzBungy
Very Frequent Poster
Posts: 2070
Joined: Fri Oct 21, 2005 11:35 am

Re: The stagnant foiler.

Postby OzBungy » Tue Oct 09, 2018 4:40 pm

I'm a bit confused. On this thread you talk about going hard and big waves and speed and stuff. On other threads you say you can't do a foiling gybe. How does that work? How do you ride these big waves if you can't turn in and out of them or carve around on them?


Return to “Hydrofoil”

Who is online

Users browsing this forum: Baidu [Spider], jyka, Øyvind, Pierrot and 2 guests