Contact   Imprint   Advertising   Guidelines

F1 Diablo bridle check

For all foil kite riders


designrmi799
Rare Poster
Posts: 3
Joined: Sun Apr 16, 2017 1:16 am
Kiting since: 2000
Local Beach: SPI,la ventana
Style: foil
Gear: F4,Levitaz,ozone,F1
Brand Affiliation: None

F1 Diablo bridle check

Postby designrmi799 » Sun Apr 16, 2017 3:24 am

I plan on doing the bridle check on my 11m diablo 2016, as per Gunnar's video. I don't think F1 publishes the bridle dimentions.
So i looking for the lengths of A1, B1, C1. Any help would be appreciated
thanks Rex

windmaker
Very Frequent Poster
Posts: 1242
Joined: Sun Jun 15, 2003 8:48 am
Kiting since: 1999
Local Beach: .
Style: Strapless surf and foil
Gear: F-One kites/ HB surf/ Taaroa foil/ Manera
Brand Affiliation: F-One
Contact:

Re: F1 Diablo bridle check

Postby windmaker » Sun Apr 16, 2017 5:56 am

Will contact the manufacturer to see if they can provide those dimensions, in the mean time check this out.The bridle speed system assembly on my Diablo 10m was different on each side so this helped (factory mistake).
Attachments
Capture.JPG
Capture 1.JPG

designrmi799
Rare Poster
Posts: 3
Joined: Sun Apr 16, 2017 1:16 am
Kiting since: 2000
Local Beach: SPI,la ventana
Style: foil
Gear: F4,Levitaz,ozone,F1
Brand Affiliation: None

Re: F1 Diablo bridle check

Postby designrmi799 » Sun Apr 16, 2017 3:28 pm

windmaker, Yes i have seen that users manual, but no dimensions. I hope you have better luck than I did.
Thanks for looking

sprinto
Rare Poster
Posts: 6
Joined: Sat Feb 11, 2017 7:48 pm
Kiting since: 2000
Local Beach: Podersdorf, Breitenbrunn
Lake Neusiedl
Style: Hydrofoil
Gear: Levitaz Aspect
Ozone Edges
Brand Affiliation: Sailmaker at Lake Neusiedl

Re: F1 Diablo bridle check

Postby sprinto » Sun Apr 30, 2017 4:44 pm

Hi, if someone has dimensions for a 11m Diablo V1, I am interested for comparison.

One more thing: Do you guys also have two attachment points for the A bridle?
2017-04-27 11.35.15.jpg
Attachment points A bridle
And has someone tried both?

designrmi799
Rare Poster
Posts: 3
Joined: Sun Apr 16, 2017 1:16 am
Kiting since: 2000
Local Beach: SPI,la ventana
Style: foil
Gear: F4,Levitaz,ozone,F1
Brand Affiliation: None

Re: F1 Diablo bridle check

Postby designrmi799 » Mon May 01, 2017 7:20 pm

Sprinto
My A's are also attached to the front loop. Possible less bar pressure on rear loop.??

sprinto
Rare Poster
Posts: 6
Joined: Sat Feb 11, 2017 7:48 pm
Kiting since: 2000
Local Beach: Podersdorf, Breitenbrunn
Lake Neusiedl
Style: Hydrofoil
Gear: Levitaz Aspect
Ozone Edges
Brand Affiliation: Sailmaker at Lake Neusiedl

Re: F1 Diablo bridle check

Postby sprinto » Wed Sep 13, 2017 7:12 pm

Hi,
last time in very light winds i noticed that my Diablo V1 10m was producing a lot of power in downstroke but had no grunt for keeping me going.

So today I checked the bridles. The result was, it looked like the situation labeled #4 in the picture so I lengthened B, now it looks like #2.
Can anyone tell what's the difference in flying characteristics if you compare situations labeled #1,2 and 3?
From my understanding the profile is deeper for #2 so it should have more grunt compared to 1 or 3...


Image
Attachments
diablo_bridle.jpg
diablo_bridle.jpg (19.92 KiB) Viewed 138 times

socommk23
Frequent Poster
Posts: 438
Joined: Mon Oct 03, 2016 10:05 pm
Kiting since: 2001
Local Beach: Hill head
Favorite Beaches: Brean. Uphill. Pembrey. Hill head. Meon shore
Style: Keeping the kite dry....hopefully
Gear: F.one diablo 15, 11 and 8m . Pansh aurora2 15m. Pansh sprints and firsts and Adams and flux .
Brand Affiliation: None

Re: F1 Diablo bridle check

Postby socommk23 » Wed Sep 13, 2017 7:31 pm

1 and 3 are essentially the same. Any difference in feel will be trimmed out. You'll notice no difference. 2 give a deeper camber. Though very exaggerated on the picture...again you'd probably notice very little difference....maybe a little more grunt but less speed if noticeable at all.

sprinto
Rare Poster
Posts: 6
Joined: Sat Feb 11, 2017 7:48 pm
Kiting since: 2000
Local Beach: Podersdorf, Breitenbrunn
Lake Neusiedl
Style: Hydrofoil
Gear: Levitaz Aspect
Ozone Edges
Brand Affiliation: Sailmaker at Lake Neusiedl

Re: F1 Diablo bridle check

Postby sprinto » Wed Sep 13, 2017 8:45 pm

Thx

I'm with you that (almost) any difference between 1 and 3 will be trimmed out.

In my case B was 2cm shorter than A and B and is now 2cm longer than A and B (in other words I added 4cm), so I'm exited how much difference I will experience.

socommk23
Frequent Poster
Posts: 438
Joined: Mon Oct 03, 2016 10:05 pm
Kiting since: 2001
Local Beach: Hill head
Favorite Beaches: Brean. Uphill. Pembrey. Hill head. Meon shore
Style: Keeping the kite dry....hopefully
Gear: F.one diablo 15, 11 and 8m . Pansh aurora2 15m. Pansh sprints and firsts and Adams and flux .
Brand Affiliation: None

Re: F1 Diablo bridle check

Postby socommk23 » Wed Sep 13, 2017 9:03 pm

sprinto wrote:
Wed Sep 13, 2017 8:45 pm
Thx

I'm with you that (almost) any difference between 1 and 3 will be trimmed out.

In my case B was 2cm shorter than A and B and is now 2cm longer than A and B (in other words I added 4cm), so I'm exited how much difference I will experience.
Report back. Be good to hear your experiences. 4cm difference is huge. So 2cm fro. The norm will make a difference. Might get some serious hang time but could stall early too. Keep us updated


Return to “Foil Kites”

Who is online

Users browsing this forum: No registered users and 3 guests