Here you can exchange your experience and datas about your home build boards
-
NorCalNomad
- Very Frequent Poster
- Posts: 838
- Joined: Thu Feb 13, 2014 4:40 am
- Local Beach: San Francisco
- Gear: Why should it matter?
-
Has thanked:
0
-
Been thanked:
3 times
Postby NorCalNomad » Thu Jul 07, 2016 12:12 am
Are most of the foil plates (LF, Cab, Levitaz, etc) on a standard hole dimension yet? Going to be embarking on a DIY foil build and would like to see if I can make it interchangeable with some stock OEM parts to benchmark my work against commercial stuff.
From my searching I've found Levitaz dim's
Thanks!
-
Starsky
- Very Frequent Poster
- Posts: 4373
- Joined: Mon Apr 19, 2004 12:12 pm
- Brand Affiliation: None
- Location: Ontario
-
Has thanked:
0
-
Been thanked:
3 times
Postby Starsky » Thu Jul 07, 2016 12:38 am
That seems to be the defecto plate standard. You will find plenty to compare against with those dims.
-
foilonfoil
- Very Frequent Poster
- Posts: 579
- Joined: Thu Mar 19, 2015 8:31 am
- Local Beach: Belmont Shore, CA / Hood River, OR
- Favorite Beaches: Crissy Field, San Francisco, CA / Benicia, CA / Sail Bay, San Diego, CA / Hermosa Beach, CA
- Style: Kitefoil
- Gear: Flysurfer Sonic Race, Core Section V1's, MikesLab Foil, Camet Boards.
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
2 times
Postby foilonfoil » Thu Jul 07, 2016 1:20 am
For DYI, rails will allow you to adjust position of foil so only the 90mm is critical.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 53 guests