Here you can exchange your experience and datas about your home build boards
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Fri Feb 24, 2017 8:15 am
-
kostantin
- Medium Poster
- Posts: 177
- Joined: Wed Sep 10, 2008 3:44 am
- Local Beach: Sahlenburg
- Favorite Beaches: Beauduc
- Gear: Switch, PANSH, Fisch Kiteboards
- Location: Germany
-
Has thanked:
0
-
Been thanked:
5 times
-
Contact:
Postby kostantin » Fri Feb 24, 2017 3:34 pm
Hi,
I case you should have no pictures of your infusion setup, I am not able to help.
I make my money arranging infusion a part that is around 65 meters long, daily. I have a slight idea what I am talking about.
Your pick
tks
kosta
-
Blackrat
- Frequent Poster
- Posts: 252
- Joined: Thu Mar 12, 2015 4:55 pm
- Local Beach: Jeffreys Bay , South Africa
- Gear: old
- Brand Affiliation: None
- Location: Jeffreys Bay South Africa
-
Has thanked:
0
-
Been thanked:
0
Postby Blackrat » Fri Feb 24, 2017 4:56 pm
Kosta ...
You misunderstand ... He is not using infusion now , he WANTS to use infusion methods
I'd like to know who is successful in using infusion with closed moulds
-
kostantin
- Medium Poster
- Posts: 177
- Joined: Wed Sep 10, 2008 3:44 am
- Local Beach: Sahlenburg
- Favorite Beaches: Beauduc
- Gear: Switch, PANSH, Fisch Kiteboards
- Location: Germany
-
Has thanked:
0
-
Been thanked:
5 times
-
Contact:
Postby kostantin » Fri Feb 24, 2017 5:03 pm
Hi,
what do you mean with closed molds. Two halves to be injected separately ?
-
rynhardt
- Very Frequent Poster
- Posts: 980
- Joined: Wed Sep 11, 2013 3:51 pm
- Local Beach: Langebaan
- Favorite Beaches: Langebaan
- Style: Freeride
- Gear: Cloud C2 17
Hoff Twinwave
- Brand Affiliation: None
- Location: Johannesburg, South Africa
-
Has thanked:
26 times
-
Been thanked:
30 times
Postby rynhardt » Fri Feb 24, 2017 6:00 pm
kostantin wrote:Hi,
I case you should have no pictures of your infusion setup, I am not able to help.
I make my money arranging infusion a part that is around 65 meters long, daily. I have a slight idea what I am talking about.
Your pick
tks
kosta
Can you show some pictures? Are you doing boats, turbine blades or something similar?
-
Blackrat
- Frequent Poster
- Posts: 252
- Joined: Thu Mar 12, 2015 4:55 pm
- Local Beach: Jeffreys Bay , South Africa
- Gear: old
- Brand Affiliation: None
- Location: Jeffreys Bay South Africa
-
Has thanked:
0
-
Been thanked:
0
Postby Blackrat » Fri Feb 24, 2017 6:08 pm
Two moulds injected together ( already closed )
-
kostantin
- Medium Poster
- Posts: 177
- Joined: Wed Sep 10, 2008 3:44 am
- Local Beach: Sahlenburg
- Favorite Beaches: Beauduc
- Gear: Switch, PANSH, Fisch Kiteboards
- Location: Germany
-
Has thanked:
0
-
Been thanked:
5 times
-
Contact:
Postby kostantin » Fri Feb 24, 2017 6:49 pm
@blackrat
Hm,
I know know that Siemens is producing power mills like that. Masts are not thick enough for this process. You will end with all kind of waste in the mast that can not be removed. Plastic bag, flow media. It will add weight to your part, you loose thickness.
There is no practical solution to infuse the resin is such a small part. Or the better explanation, too much hassle for no or little profit, if it can be done at all, I have serious doubts.
My idea is different, I have already a name for it SID, shot in the dark. In early spring I should have the first mast finished.
tks
kosta
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Sat Feb 25, 2017 1:47 pm
Kosta,
you can't have any waste in the mast.
The method is simple, wrap the mast core in carbon, carefully handling it to stay in position (spray a glue if needed). Than put everything in a vacuum bag, as you would for vacuuming, adding a flow mesh, spiral tube, etc.
Apply vacuum.
Infuse.
Done.
This is obviously very simplified. Kosta, your thoughts?
I mean, we can argue that a prepreg carbon is to much but people are doing it as I understand.
D.
-
FrederikS
- Frequent Poster
- Posts: 221
- Joined: Sat Nov 24, 2012 3:33 pm
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby FrederikS » Sat Feb 25, 2017 6:28 pm
Just make two halfs and glue them together that is what I did.
-
kostantin
- Medium Poster
- Posts: 177
- Joined: Wed Sep 10, 2008 3:44 am
- Local Beach: Sahlenburg
- Favorite Beaches: Beauduc
- Gear: Switch, PANSH, Fisch Kiteboards
- Location: Germany
-
Has thanked:
0
-
Been thanked:
5 times
-
Contact:
Postby kostantin » Sun Feb 26, 2017 3:03 pm
@downunder
Yes this is a good plan. Some suggestions you might find helpfull. I would use nylon fly fense as flow media. We can buy this here in our drug store. You need 4 layers if it is the thin material. Don't cover the complete mast but stop 20mm before the end / width of the mast. On the side where the the air is pulled out, cover the tube with stripes of toilet paper, 20 mm wide and every 10cm . This stripes should not touch the flow media, but the carbon, you can fix all this with very small stripes of duct tape You must buy hole foil for infusion, plastik foil for infusion and peel ply. Avoid large wrinkels in the hole foil. Don't put your epoxy in a high bottle for infusion, it will react and cook. I use milk carton, the ones made out of paper, the inside is covered with aluminum. You must be ready to put something under you milk carton to flip it on the edge before the resin ends. Rule of thumb - 50% mixed epoxy / weight ratio carbon. Some will be left in the tube, peel ply, flow media. Its cool to have a buddy in the workshop, mixing epoxy or opening a bootle of beer
tks
Kosta
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 160 guests