Contact   Imprint   Advertising   Guidelines

Epoxy Gloss Coats How To

Forum for hydrofoil builders.

Very Frequent Poster
Posts: 2658
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden

Re: Epoxy Gloss Coats How To

Postby TomW » Thu Sep 28, 2017 8:00 am

handy wrote:
Sun Sep 17, 2017 8:13 am
not that much of a problem to get a perfect finish coat. Every coat will only be as good as the one before, so put down a nice clean sanding coat, sand it perfect with a 80 grit, brush dust off, clean it with DNA wait 10 minutes and put your finish coat with a foam brush on.
Temperature is very important, always do finish coats in a clean room with falling temperatures, if temps raise during curing you will get bubbles.
Use the fastest hardener you can get, Sicomin EVO with Super Fast hardener works great. Then sand with 600 800 1000 1200 machine wet sanding and polish as shiny as you like.
I like the way you " gloss over" the sand 600-800-1000-1200- part. When I build a kite surfboard this is 4 hrs of solid work, not including a break. I'm not using a machine to avoid sand-through, except for last 2 steps of liquid rubbing compound and polishing.

Matt finish takes 2 hrs.

Medium Poster
Posts: 101
Joined: Thu Apr 10, 2008 3:49 pm
Kiting since: 0
Gear: wave
Brand Affiliation:

Re: Epoxy Gloss Coats How To

Postby handy » Thu Sep 28, 2017 8:59 am

When I build a kite surfboard this is 4 hrs of solid work
takes me around 45 minutes for a kitesurf board to to sand and polish deck and bottom.
But hey, I do this mostly very day ;-)

User avatar
Very Frequent Poster
Posts: 1562
Joined: Mon Jul 01, 2013 7:16 am
Kiting since: 1970
Gear: building my own
Brand Affiliation: None
Location: Perth, Australia

Re: Epoxy Gloss Coats How To

Postby downunder » Thu Sep 28, 2017 9:45 am


Can't be compared, you are business, not an DIY garage builder :) Apples with oranges please :)

Return to “Hydrofoil Builders”

Who is online

Users browsing this forum: No registered users and 1 guest