Re: Epoxy Gloss Coats How To
Posted: Thu Sep 28, 2017 8:00 am
I like the way you " gloss over" the sand 600-800-1000-1200- part. When I build a kite surfboard this is 4 hrs of solid work, not including a break. I'm not using a machine to avoid sand-through, except for last 2 steps of liquid rubbing compound and polishing.handy wrote: ↑Sun Sep 17, 2017 8:13 amnot that much of a problem to get a perfect finish coat. Every coat will only be as good as the one before, so put down a nice clean sanding coat, sand it perfect with a 80 grit, brush dust off, clean it with DNA wait 10 minutes and put your finish coat with a foam brush on.
Temperature is very important, always do finish coats in a clean room with falling temperatures, if temps raise during curing you will get bubbles.
Use the fastest hardener you can get, Sicomin EVO with Super Fast hardener works great. Then sand with 600 800 1000 1200 machine wet sanding and polish as shiny as you like.
Matt finish takes 2 hrs.