corbett wrote:Faxie wrote:My V2 bar single line safety works fine. One thing I noticed is that when I replaced my lines, the new power lines had a slightly thicker splice (because of the stiching keeping the splice in place I think) and they were a bit harder to pull through the swivel. But when you need the safety, it works fine. The kite pulls hard enough to get the line through the swivel.
I heard from some people the SS safety has the same problem sometimes, but it releases fine too.
With respect, you don't have the same kites as I do.
Slingshot Z 9 and 13m both failed in the middle wind ranges. Not tried in lower or upper wind ranges.
Core 19m xr3 - disaster, failed in 9mph, kite scuffed for several minutes all over the window(sand).
17mph - absolute failure to pull through standing in water. Had a friend come and assist and try to pull the splice through by hand but he failed to pull it through. I also failed to pull it through manually. Naturally, the kite was pulling strongly, but not dangerously for me.
I tugged like a mad man at leash but no way was that line going to come through.
As I mentioned before, I've spliced new lines but I don't think Switch should be continuing to sell this and all bars with this problem should be recalled.
On the Switch forum, someone mentioned he spliced some rope and someone asked "are you in the marines?". Alot of Switch customers are new to the sport and you're selling them a bar with shit safety.
I'll make a video, Sunday looks good.
CNN, ITN, BBC, Tass, Channel 4, Fox News... Oh wait not fox....They will all be filming!!!!