What is the edge thickness on the new 08 spleene boards? They say they are thinner than 07.
bd
sharp rails on spleene baords
-
R a i n e r
- Frequent Poster
- Posts: 295
- Joined: Mon Mar 10, 2003 3:46 pm
- Brand Affiliation: None
- Location: Germany
- Has thanked: 0
- Been thanked: 0
Re: sharp rails on spleene baords
They are just as thin as the 07's tip-edges had been - just all the way around the board.
Makes the boards cut through chop much better.
I've tested the '08 RIP34 against my '07 RIP34.
The difference is amazing!!
Take care!
Rainer (not the one from Spleene)
Makes the boards cut through chop much better.
I've tested the '08 RIP34 against my '07 RIP34.
The difference is amazing!!
Take care!
Rainer (not the one from Spleene)
-
Bigdog
- Very Frequent Poster
- Posts: 573
- Joined: Mon Jul 26, 2004 6:50 pm
- Local Beach: Wolfe Island
- Style: Old and grey surfer dude style
- Gear: Core xr5 and windego boards
- Brand Affiliation: None
- Location: Wolfe Island Canada
- Has thanked: 0
- Been thanked: 0
- Contact:
Re: sharp rails on spleene baords
Rainer
I made a change this year in the boards I make and I went to 1-2mm rails and compared to 5mm and I find the performance in chop much better also.
What is the actual measurement at the edges of the new one? I am a little concerned about being too sharp from a safety perspective.
Thanks
I made a change this year in the boards I make and I went to 1-2mm rails and compared to 5mm and I find the performance in chop much better also.
What is the actual measurement at the edges of the new one? I am a little concerned about being too sharp from a safety perspective.
Thanks
Who is online
Users browsing this forum: CosmicCraze and 191 guests