Forum for kitesurfers
-
Kiteus Maximus
- Medium Poster
- Posts: 146
- Joined: Wed Dec 05, 2012 10:37 pm
-
Has thanked:
0
-
Been thanked:
0
Postby Kiteus Maximus » Thu May 02, 2013 10:34 pm
flybykite wrote:The 2013 ozone edges have low pressure but still just enough to feel connected to the kite. Its adjustable as well.
+1
Actually the Edge can be adjusted to feel like there is next to no bar pressure. The Cabrinha Velocity also has very low bar pressure as well.
-
ed257
- Very Frequent Poster
- Posts: 1810
- Joined: Mon Sep 23, 2002 1:00 am
- Brand Affiliation: None
- Location: Cape Cod, MA USA
-
Has thanked:
0
-
Been thanked:
1 time
Postby ed257 » Fri May 03, 2013 2:21 am
bpchilds wrote:Thank you all for your input.
I will definitely be trying before buying.
Did anyone else get an elbow injury from kiting? Will it ever go away?
Thanx
B
I got the elbow tendonitis from kiting, tennis and weight training. I found four things that resolved it:
1. I did the wrist roller exercises (see video links someone added to this thread)
2. I changed kite to GK Sonic (super light bar pressure, too little actually)
3. I rig for enough power so I don't have to sine a lot
4. I set up my bar with a moveable stopper and ride against the stopper most of the time.
It actually cleared up mostly in two weeks, but completely in about 5 weeks.
Ed
-
Westozzy
- Very Frequent Poster
- Posts: 2918
- Joined: Sat Jun 30, 2012 11:25 am
- Local Beach: Mandurah
- Style: Freeride, wave
- Gear: Rebel, Vegas 2012
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby Westozzy » Fri May 03, 2013 5:46 am
I ride my edge on the second setting at the kite, because the light bar pressure setting is too light. Very very light bar pressure. Can't feel the kite enough during transitions with kite loops and the such. Even on the second setting it is damn light. Again work out what riding style you are after then find the correct aspect to suite. Then look at the varying bar pressures through demos in that category. Also apply the other biomechanical preventative measures offered.
-
jumarcil
- Frequent Poster
- Posts: 493
- Joined: Thu Dec 31, 2009 6:18 am
- Local Beach: Bozo Beach
- Gear: Core xr3: 7 and 9, escape 11m 2015, leopard 9 and 11
- Brand Affiliation: None
- Location: Quebec
-
Has thanked:
0
-
Been thanked:
1 time
-
Contact:
Postby jumarcil » Fri May 03, 2013 11:20 am
knotmyfault wrote:Bandit 6 ? Very unstable 3 struts kite, jelly fish a lot in gusty wind .. And the bar pressure is not on the light side at all, more on medium/light pressure.
The velcro-style quick release is not reliable and can only be operated from one side, outdated system.
Ozone Edge is unbeatable regarding light bar pressure and power on demand!
Nope b6 is light, beside the edge and the flysurfer speed 3, i found that they are pretty much the lowest bar pressure kite out there. If your b6 was jellyfishing it is becaused you didn't pump it hard enough. Maybe not as stable in the gust as a switchblade but it beats a lot of kite out there. We get to ride gusty uneven north wind often and the b6 is handling the gust very good. Depower throw being short, you can kill really fast those big gust. Did try the edge a couple of time and it really is a good kite but damn it is slow turning. Depends on what you look for. Edge is a race kite as opposed to the b6 which is a lot more freestyle or wave. As for the qr you are perfectly right i aint crazy about that archaic system.
-
dawind
- Rare Poster
- Posts: 21
- Joined: Thu Nov 22, 2012 3:30 pm
- Gear: Zian Aquila 10m, 12m, 14m
Crazyfly 127cm, 136cm
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby dawind » Sat May 04, 2013 7:40 pm
The latest F-One Bandit has what your looking for, comfortable. Also the 2013 Zian Aquila has both very low bar pressure and powerful for its size.
-
Hunqi
- Frequent Poster
- Posts: 205
- Joined: Tue May 03, 2005 3:52 pm
- Style: Old School
- Gear: Ozone
- Brand Affiliation: None
- Location: Testiflying
-
Has thanked:
0
-
Been thanked:
0
Postby Hunqi » Sat Aug 10, 2013 9:39 pm
-
hmattar
- Medium Poster
- Posts: 167
- Joined: Sun Jul 06, 2008 12:21 am
- Local Beach: salinas/PA-Brazil
- Favorite Beaches: Salinas/PA Cumbuco/CE
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby hmattar » Sat Aug 10, 2013 10:15 pm
I had cabrinhas before so I know your pain. Had switchblades from 2009 and 2010 and crossbow lw from 2012.
If you really want power, you can either get a race kite with low bar pressure(I own an airush vxr and it's very very very light bar pressure), you can try demo that.
If you want a kite with low bar pressure but with a more freeride feel, try a rebel(owned one) or a fuse(currently my main kite) from north.
Both kites have very low bar pressure and amazing power.
-
alkiter
- Frequent Poster
- Posts: 403
- Joined: Fri Nov 03, 2006 9:49 pm
- Kiting since: 2007
- Local Beach: Jupiter
- Style: Freestyle
- Gear: Whatever works
- Brand Affiliation: None
- Location: South Florida
-
Has thanked:
16 times
-
Been thanked:
3 times
Postby alkiter » Sun Aug 11, 2013 11:44 am
Bille wrote:bpchilds wrote:Hello,
I have recently developed some elbow problems and it might be from my older kites that have heavy bar pressure and it is straining my tendons/ligaments when steering the kite.
...
I am an advanced rider and will use the kite mainly for freeriding.
Thank you all for your help,
B
The "Real" problem isn't the bar-pressure ; i believe it could be the Angle that
we hold the bar with our hands ?
While sitting at your monitor reading this , try holding your hands like you have
a bar in your hands ; move the make-believe bar in and out and turn it simultaneously.
I can actually Feel the elbow-tendons moving !
NOW -- rotate your hands 90-deg so your palms are facing each other and repeat the
same as above ; that change in angle makes the pressure in my elbow completely go
away .
I first noticed this while kiting in my Buggy ; i had my 10M PL Venom up on
a bar & the wind picked up. I put the PL away and grabbed a 4-line, 2.5M on handles
and noticed it was Way easier on my elbows, to control the kite.
I'm MOD-ing an old bar i have so it has webbing-loops that are below the bar.
This will allow me to control the kite like normal with the bar
OR
grab the loops & control the kite like i do a PG, (with the loop-handles).
I May need to lock the bar full UP so it don't interfere with the controls ?
Bille
Agree completely. I'm now using a Blade Unibar and the slight bend of the bar seems to help by reducing the wrist angle when doing hard turns or looping the kite.
-
Westozzy
- Very Frequent Poster
- Posts: 2918
- Joined: Sat Jun 30, 2012 11:25 am
- Local Beach: Mandurah
- Style: Freeride, wave
- Gear: Rebel, Vegas 2012
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby Westozzy » Sun Aug 11, 2013 11:59 am
ozonelevel wrote:Bille wrote:bpchilds wrote:Hello,
I have recently developed some elbow problems and it might be from my older kites that have heavy bar pressure and it is straining my tendons/ligaments when steering the kite.
...
I am an advanced rider and will use the kite mainly for freeriding.
Thank you all for your help,
B
The "Real" problem isn't the bar-pressure ; i believe it could be the Angle that
we hold the bar with our hands ?
While sitting at your monitor reading this , try holding your hands like you have
a bar in your hands ; move the make-believe bar in and out and turn it simultaneously.
I can actually Feel the elbow-tendons moving !
NOW -- rotate your hands 90-deg so your palms are facing each other and repeat the
same as above ; that change in angle makes the pressure in my elbow completely go
away .
I first noticed this while kiting in my Buggy ; i had my 10M PL Venom up on
a bar & the wind picked up. I put the PL away and grabbed a 4-line, 2.5M on handles
and noticed it was Way easier on my elbows, to control the kite.
I'm MOD-ing an old bar i have so it has webbing-loops that are below the bar.
This will allow me to control the kite like normal with the bar
OR
grab the loops & control the kite like i do a PG, (with the loop-handles).
I May need to lock the bar full UP so it don't interfere with the controls ?
Bille
Agree completely. I'm now using a Blade Unibar and the slight bend of the bar seems to help by reducing the wrist angle when doing hard turns or looping the kite.
HEY YA RIGHT JUST TRIED IT.
-
nicor
- Frequent Poster
- Posts: 253
- Joined: Wed Jul 18, 2007 4:36 pm
-
Has thanked:
2 times
-
Been thanked:
0
Postby nicor » Sun Aug 11, 2013 1:33 pm
I agree in saying its not the pressure of the bar, its the angle of elbows.
I had ozone c4s, which have very, very light bar pressure. But this is a dynamic kite that needs to actively ridden, so I was continuously sinning and throwing the kite around. Additionally, because the c4s are a c kite you need to have the bar almost totally in all the time causing your elbows to be bent all the time. This combination made for some painful tennis elbow.
I changed my kites to lithiums last year, which I would say have a lot of bar pressure, and funny enough my tennis elbow cleared up in a couple of weeks! So whats going on here. Well I believe because the Lithiums are deltas, they have a lot of static grunt, so you do not need to move the kite very much to get going. Also I find the my arms are almost out all the way (no bent elbows). These are really the solutions to the pain.
One other theory I have is a kite with light bar pressure will pull hard off the front lines which means that more pressure is being put on you back, which can cause worse problems.
Anyways I changed to lithiums more for the easy jumping, my tennis elbow clearing up was just a nice surprise.
The Bandits would be similar to the lithiums, because they are deltas, and I have heard they have lighter bar pressure so this might be a very good choice. BTW I've never seen one jelly fish, they look solid.
Return to “Kitesurfing”
Who is online
Users browsing this forum: AKBL, andrzej351, bittersvolcom, bragnouff, Brent NKB, Exage, foilkite90, grigorib, Hasse, mede, plasma180, UrosR, wowkitesurf, Yahoo [Bot] and 581 guests