Here you can exchange your experience and datas about your home build boards
-
alexeyga
- Very Frequent Poster
- Posts: 1094
- Joined: Thu May 31, 2007 12:41 pm
- Kiting since: 2006
- Weight: 200
- Favorite Beaches: Ocean shore!
- Style: Freeride dongling
- Gear: Eleveight / Shinn / North / Axis / Slingshot / Airush
- Location: Montreal, Canada
-
Has thanked:
3 times
-
Been thanked:
35 times
Postby alexeyga » Thu Jan 12, 2017 4:47 pm
What would you - humble and experienced board builders - use to re-finish a bottom (and possibly - the top) of the carbon board like F-One's?
Given that it's not a bare carbon on the most outer layer, but the graphics inlay.
Epoxy clear coat? Or some uber-tough, nano-cristal deck lacquer?
-
downunder
- Very Frequent Poster
- Posts: 2821
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
160 times
Postby downunder » Fri Jan 13, 2017 2:50 am
Out of luck unfortunately. The topsheet for bonding side is Corona treated.
-
alexeyga
- Very Frequent Poster
- Posts: 1094
- Joined: Thu May 31, 2007 12:41 pm
- Kiting since: 2006
- Weight: 200
- Favorite Beaches: Ocean shore!
- Style: Freeride dongling
- Gear: Eleveight / Shinn / North / Axis / Slingshot / Airush
- Location: Montreal, Canada
-
Has thanked:
3 times
-
Been thanked:
35 times
Postby alexeyga » Fri Jan 13, 2017 5:05 am
Hmmmmm, what's "Corona"? Sorry for the lack of knowledge...
-
downunder
- Very Frequent Poster
- Posts: 2821
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
160 times
Postby downunder » Fri Jan 13, 2017 6:13 am
Google "Corona treated plastic"....
-
zob
- Frequent Poster
- Posts: 476
- Joined: Tue Feb 24, 2009 1:43 pm
- Local Beach: Grado Pineta (IT), Fossalon (IT)
- Style: Freeride, strapless hooked-in
- Gear: FS S3 19m2 DLX, S3 CE 12m2 DLX & S4 8m2 DLX
Homemade Surf & Snow Boards
MBS Pro90
- Location: Iv.G.-Slovenia
-
Has thanked:
21 times
-
Been thanked:
3 times
-
Contact:
Postby zob » Fri Jan 13, 2017 10:53 am
What kind of damage are you trying to fix? Some cosmetic surface scratches or something deeper?
-
Jbrook
- Very Frequent Poster
- Posts: 993
- Joined: Sat Jul 31, 2004 2:39 am
-
Has thanked:
0
-
Been thanked:
0
Postby Jbrook » Fri Jan 13, 2017 1:55 pm
Corona is beer and is cheap at 7-11.
-
alexeyga
- Very Frequent Poster
- Posts: 1094
- Joined: Thu May 31, 2007 12:41 pm
- Kiting since: 2006
- Weight: 200
- Favorite Beaches: Ocean shore!
- Style: Freeride dongling
- Gear: Eleveight / Shinn / North / Axis / Slingshot / Airush
- Location: Montreal, Canada
-
Has thanked:
3 times
-
Been thanked:
35 times
Postby alexeyga » Fri Jan 13, 2017 3:54 pm
downunder wrote:Google "Corona treated plastic"....
Thanks! So if I got it right, both top and bottom sheets are nothing but plain plastic pre-treated with "corona" for better adhesion with the inner layers? Hence - there isn't any "liquid" finishing coats on either top or bottom surfaces?
zob wrote:What kind of damage are you trying to fix? Some cosmetic surface scratches or something deeper?
Just cosmetic sand-rush and some rub-marks.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 144 guests