Gunnar seriously I asked you that before and you said it'll never hit the pulley. Which at the time I thought was a impossible but not completely impossible. So thanks for the truth. Now I can safely say Ozone mixers will get the same problem flysurfers have and limit depower when the pulley lines shrink.
Anyone own a Chrono V1 who’s still using the original speed system pulley lines that were sleeved dyneema bridle line? I have upgraded both my 18m and 12m with the SSLines Speed System Pulley Lines (PB1,PB2/PC1) Amsteel as recommend by Ozone some time ago now, but both kites speed systems looks to be need of adjustment having performed the “speed system Zero Check”.
Only asking as I kept the old dyneema pulley lines and refitted them to one side of my 12m Chrono, more out of curiosity and found that all the knots lined up perfectly. Admittedly these lines have probably not exceeded 60 hours of use, so perhaps not a fair test. Just curious to hear if anyone is still using dyneema pulley lines as opposed to the Amsteel lines. The dyneema lines as I understand were not deemed as suitable and could wear out/break. The Amsteel lines are much thicker and have a higher breaking strain, but unsure as to shrinking properties when compared to sleeved dyneema lines.