Question, please: I have Moses Fluente with 633 wings, and the 91cm mast in certain situations (waves with low tide and reefs) is a bit too long and I would like to have a shorter mast, abt 70cm would be perfect for these conditions. However, Moses 71cm mast is quite expensive and hence I’m looking...

[

My DIY pocket board is 112cm x 46cm x3cm is made from $12 piece of extruded polystyrene and layered with 12k carbon fibre.Then cheap eva foam matting for the deck grip.Overall weight is 2.3kg..

Loving :D my new big Italian moses 633 For kite foiling, With slight modification to fit slingshot 24 inch mast for shallow water cruising.... .Holes on slingshot mast are almost a match for the moses fuselage but the mast profile was too wide to fit the moses fuse .,With some slight grinding ground...

Made using 4mm plywood core ,and honeycomb,layered with 12k unidirectional cloth And peel ply,,all pressed & compacted using large F clamps.No vacum bagging.

I cut up some carbon fibre cloth really fine mixed with epoxy glue to form a thick paste ,packed it into the oversized hole,once set,drilled out to 8mm,nice and strong

Hi converted a slingshot Alien twister to suit hydrofoiling, reinforced top and bottom around mast mount with 12k carbonfibre,also drilled oversize 8mm bolt holes and filled with carbon..The foil mounting is a fair way towards the back of the board 140mm from tail v, which turns out to be spot on as...

Made a few different profile carbon fibre wings for my hoverglide set up.Did not have the front wing only the back.So set about making a few wings and trying them to find one that works,Made at least 6, tried & tested for performance,found 2 that suit freeride foiling, one in particular. flat ,thin ...

Hi was wondering if someone could post a clear diagram of a tested FLS for the Pansh A15m ,also for the Aurora 12m & 19m.
Also recommended line length 25 -30m or other? Cheers

HI Any chance of a picture of a clear FLS for the PanshA15 ! Any ideas to mod a Pansh Aurora 19m would be great also.cheers