The Edge will Jump the best but the Pivot will be better in waves and Jump really great too. I have own several Ultra they are not the best for jumping so any of those 3 should be better. The Ultra is amazing for foiling and good in waves but a kite designed to drift well will pull downwind for Jump...

I have been building and upgrading bars for a long time. I buy the Amsteel rope, Ronstan blocks, cleats etc.. at my local sailboat supply store. They have the exact same ones used on kite bars. I ordered a lot of chicken loops, floats etc.. from Switch they used to have good prices and decent hardwa...

I sealed several mast by pouring silicone inside and then putting a tape and leaving the mast upside down on the tape the silicone solidifies and you remove the tape. you do this on both ends.

Those are all square door type boards none of them will be smooth in choppy water. Personally I'm heavier than you and I can ride easily in 12 knots with my Axis Ultra it is super smooth in the chop and can do anything a freestyle board can do. I would be using a 15m with a twin tip.... That's if I ...

Pretty sad to loose a fellow kiter. Apparently the guy was snow kiting on the ice with a paraskiflex those are like a cross between a kite and a sail they don't float and they stop pulling when there is no tension in the lines, the lines are short and they just fall flat and stay there once on the g...

Yes 99% of the fins are compatible the only ones that I saw that were different is F-One the have a unique square box thing for their fins.

These are the same as eBike batteries a lot places that build and fix ebike batteries would be able to fix it if you can't get it replace on warranty. I built a few ebikes so I know a few things about those. The cells are probably fine it must be the BMS board that has a burned component.

I find that the rider weight doesn't make much difference on a foil I have been out with heavier riders than me on the same wing (Moses 633) and everyone was able to ride with similar size kites in different wind conditions the smaller riders have an advantage in very light wind but the difference i...

I had a switch bar for a while and didn’t like it. Very heavy. A soft aluminium center wore quickly and resulted in sharp edges that then wore out center lines. It was an early one so they may have improved? Do those Jeely bars have a stainless centers (like kiteattitude) or aluminium alloy? I beli...

I have 2 of them many sessions on them and they are perfect. They are generic bars many companies use them. I have been building an customizing bars for 15 years I own dozens of bars many are original brand name and many that I built these bars are fine nothing bad about them other than the size is ...