Bit of an old topic, but still relevant (well to me anyway). I've a Reo V5 5m and it has been seriously hardwork on the SB but an absolute dream on the Foil. After reading up on its specs, Ozone recommend a 38cm bar (I'd been using a 47cm). So I cut down an old North bar to experiment with and the c...

Ok cool sorted the technical issue! Have a look if there is an obvious improvement/tweak let me know....

https://youtu.be/VJB8ihY-Py8

https://youtu.be/-FMBVSOU8jw

Ahhhh balls the videos are such bad quality. Will repost

Ok guys I've made the following changes. All knots in a row as per manufacturers instructions apart from Z which has been extended 4cm. Here are two vids of it flying in 7-8kts ish. Any further tuning required?

https://youtu.be/SycjM-Sfu2E

https://youtu.be/7eEAqs20aqg

Great post

Ok guys thanks again. What I've decided to do seeing as the kite is only a couple of months old. I am going to revert back to the original knot settings, which I am assuming is the factory default. (Luckily I took photos prior to changes made). It was only when I changed from the factory settings to...

Awesome thanks for that....

Hey guys thank you so much for your replies. It sounds like the front stall and collapse. See attached image, a,b,c & d knots are all aligned. Do you recommend putting a 4cm spacer between the mixer knot (black) and the D bridle (blue)

Hello. Please help me. My 12m Liquidforce Elite has a very nasty habit of folding in half and falling out the sky when I'm pointing upwind in powered up conditions. It totally collapses in the middle and folds in on itself. It happened today resulting in me being rescued. I've checked the knots wher...

Oh that doesn't sound to positive. So stay clear unless you are a foil kite bridle ninja which I am not! Thanks for the heads up.