Alright, finally started with the real thing. Made a shape from the PVC board, then cut out the core ~1cm less than the final shape, will be sanding the edges and tips from 10mm to 3mm, then will pour the epoxy + carbon powder rails and inserts/fin reinforcements. Can't get proper PU or ABS rails wi...

Alright, first test results are in. I am not at all convinced infusion is the way to go now. While the 250g unidirectional carbon + 200g biax works just fine when laminated upon red cedar, and ~60cm x 20cm piece holds my weight just fine, I need to figure out how to laminate it consistently... Vacuu...

Downunder: I've read everything I could find here and in other places regarding the kiteboard construction, and your blog and posts here are very helpful and insightful, I feel much more confident now rather than just starting from scratch. I'll try a few test runs using different materials and layu...

This has crossed my mind as well, and I might reconsider the lower size, but the fact that I'll have the XL one at hand and be able to take all the measurements, is too appealing. Again, this is just the first of 5 boards I have planned, provided it doesn't suck, it has a potential new owner already...

Thank you guys for your input and helpful advice. My reasoning regarding the size: it's quite often that we get 6-8 knots of wind, and the water is too shallow for hydrofoil. 21m kite with a door is a proven solution for this. And since I have a few minions who want to start kitesurfing, having a la...

Hey guys, I am seeking for advice. I would like to build a light wind kiteboard, from the tests I've done so far, I'd probably go ahead with Flydoor 5 XL as a template (170x50): flysurfer.com/project/flydoor5/ . The goal is to have a comfy board for those light wind conditions, to accompany me on my...