I got a second hand SS glider which I am planning on putting a little epoxy on this end and c-clamping it loosely with some wax paper in b/w the c-clamp and board. I tested this and the epoxy did not attach to the wax paper. That should fill in any vacancies in this small split I think and then I may just do a small smooth coat on top of it and sand down.
The first pic below is of the split end and then any other worn areas are shown in the second pic. Am I on the right track or should I just leave it? Also, on the non-split but worn area should I lay any epoxy down there or leave it be?
Thanks.