Page 7 of 7

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 09, 2020 7:47 am
by Havre
alford wrote:
Thu Oct 08, 2020 3:15 pm
Havre wrote:
Thu Oct 08, 2020 8:53 am
Kite promos and car commercial. Always the same.

Should be a nice kite though. Still got the v1 and that is in my opinion a fantastic kite.
Love the mid-air board switch!
If only that was possible with the V1 :wink:

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 09, 2020 9:26 am
by apollo4000
Quick question on bars if okay?

What bars and v combos do people use with their enduros?

Any issues to be mindful of with non-ozone bar/v setup with various bridle configurations?

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 09, 2020 9:40 am
by Havre
I got an Ozone bar, but I can't think of any reason why it wouldn't work with any low V bar.

Ozone typically got longer lines at 25m, but I believe they sell 22m bars as well. Couldn't see that being an issue if you got a bar with shorter than 25m lines.

Connecting it shouldn't be an issue - might need to change some pigtails?

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 09, 2020 11:35 am
by zlatko23
@apollo4000 - I am flying my Enduros with OR Shift bar and Cabrinha Overdrive bar. I like how the kites fly with those bars better than the Ozone's own bar. One reason are the lines - as Havre mentions Ozone usually provides 25m lines, which takes away some of the direct connection feeling you get from a good 22/23m lines. Also in the case of OR Shift - the bar itself is more comfortable and the trim adjustment is way better than any cam cleat I have used.
Matching the connections - exactly as Havre wrote you can just swap the pigtails from steering to power lines and vice versa. Ozone should take a note amd move to the defacto current standard - knots on steering lines, loops on power lines at the kite's end.

Re: Ozone Enduro V3 Release Date ?

Posted: Thu Oct 15, 2020 2:26 pm
by Dave_5280
New video out


Re: Ozone Enduro V3 Release Date ?

Posted: Thu Oct 15, 2020 5:01 pm
by iriejohn
apollo4000 wrote:
Fri Oct 09, 2020 9:26 am
Quick question on bars if okay?

What bars and v combos do people use with their enduros?

Any issues to be mindful of with non-ozone bar/v setup with various bridle configurations?
Have flown mine on Slingshot Sentinel bars, no issues.

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 16, 2020 9:00 pm
by Dietsdontworkuk
apollo4000 wrote:
Fri Oct 09, 2020 9:26 am
Quick question on bars if okay?

What bars and v combos do people use with their enduros?

Any issues to be mindful of with non-ozone bar/v setup with various bridle configurations?
I’ve flown my enduros with various bars. Any low V will work, eg slingshot, Naish, cab. You may need a pigtail set to make the attachments that’s all. I have 2 bars, one with 23m lines the other with 25. I also have 2m extensions that I occasionally use with my zephyr, but that flies so much better (more fun) on 25m lines.

The length I like best is 23m - even on the 14m - unless the wind is marginal. Kiteloops are way better on this length and the kites are generally more fun and faster. Better for surfing too.

I had a 22m set for a while but they didn’t seem to be flying quite right, not quite in the sweet spot and power delivery a bit on/off.

I use 50cm bar on all kites, even the zephyr and 14m enduro feels prefect.

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 30, 2020 10:18 pm
by mar menor
what is the bar pressure like on v3,in comparison to v2 and the alphas?

Re: Ozone Enduro V3 Release Date ?

Posted: Fri Oct 30, 2020 11:45 pm
by zlatko23
@mar menor - I can't say I notice any difference in bar pressure.

Re: Ozone Enduro V3 Release Date ?

Posted: Wed Nov 04, 2020 10:37 pm
by Dietsdontworkuk
mar menor wrote:
Fri Oct 30, 2020 10:18 pm
what is the bar pressure like on v3,in comparison to v2 and the alphas?
on the freeride setting it's the same. On the freestyle setting it's a tiny bit lighter - on the 3rd knot on the v2 (freestyle setting) it felt a bit too heavy for me. I think the knots are actually a little closer together on the v3 but haven't measured yet. haven't been on the surf setting yet.