U.Go line mount on Slingshot lines
Posted: Mon Feb 11, 2019 11:11 pm
by ptben
Is anyone using the U.Go line mount on Slingshot lines with the standard U.Go locking rod? I’ve had a quick measure of the Slingshot centre lines and they seem thicker than 2mm on one side, and the locking rod seems very tight. I know the whole point of the locking rod is that it “locks” but it seems a bit too tight and I don’t want to damage the lines. Some of the U.Go sites mention a wider locking rod but others don’t.
Re: U.Go line mount on Slingshot lines
Posted: Tue Feb 12, 2019 4:43 am
by Bill C
You need to use the locking rod with the wider groove for thick lines like Slingshot or Switch for instance. If you are in the US/Canada, contact me and I will get you one.
billcxyz@gmail.com
Re: U.Go line mount on Slingshot lines
Posted: Tue Feb 12, 2019 8:46 am
by Leon van Bergen
ptben wrote: ↑Mon Feb 11, 2019 11:11 pm
Is anyone using the U.Go line mount on Slingshot lines with the standard U.Go locking rod? I’ve had a quick measure of the Slingshot centre lines and they seem thicker than 2mm on one side, and the locking rod seems very tight. I know the whole point of the locking rod is that it “locks” but it seems a bit too tight and I don’t want to damage the lines. Some of the U.Go sites mention a wider locking rod but others don’t.
I had the same with the thicker lines on the Click Bar but here U go:
https://www.wetsports.co.uk/u-go-kite-line-bar-2mm