Contact   Imprint   Advertising   Guidelines

Moses T60 and 633 foil

Forum for kitesurfers
Foiler alert
Rare Poster
Posts: 4
Joined: Sat Mar 23, 2019 3:44 am
Kiting since: 2001
Local Beach: DELRAY AND BOYNTON
Style: Surf and foil
Gear: F-1 Bandit, Surfboard, foil boards
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Moses T60 and 633 foil

Postby Foiler alert » Sat Mar 23, 2019 8:42 pm

Using the 633 with T60 board, how's that combination? I'm going to move the foil back like 4 inches, with new holes. Anyone on the forum riding it like that? I have some inside info on how to do it the right way, thanks to alwayskiting. Moses USA. I look forward to the discussion on this matter. Thanks. :thumb:

User avatar
Peter_Frank
Very Frequent Poster
Posts: 9084
Joined: Wed Oct 16, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: Denmark
Has thanked: 51 times
Been thanked: 51 times

Re: Moses T60 and 633 foil

Postby Peter_Frank » Sat Mar 23, 2019 9:49 pm

Foiler alert wrote:
Sat Mar 23, 2019 8:42 pm
Using the 633 with T60 board, how's that combination? I'm going to move the foil back like 4 inches, with new holes. Anyone on the forum riding it like that? I have some inside info on how to do it the right way, thanks to alwayskiting. Moses USA. I look forward to the discussion on this matter. Thanks. :thumb:

I think it will be really good, but dont have that very combo myself.
You are right it should be moved a tad back for neutral trim.

You could put your question up on the hydrofoil forum, as many foilers never go to this main forum nomore.

It is here: viewforum.php?f=196

8) Peter

Foil
Very Frequent Poster
Posts: 595
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: Flag beach for the Foil, Rhosneigr for the Foil and twintip.
Style: improving foiler.
Gear: Moses T38 full carbon Ltd edition (number 3)
2019 Groove Skates, naked carbon. 120M + 130L both gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/7/8/9
Ozone Alpha V1 10/12
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 15 times
Been thanked: 37 times

Re: Moses T60 and 633 foil

Postby Foil » Sun Mar 24, 2019 2:11 am

last year I had my Moses T60 modified to take the 663 wingset, a custom shop cut out the hole plugs and inserted mast tracks instead, I had a look inside the board to see how the old holes were put in, very basic glass spools with drill holes through the center and not that well stuck to the boards skin,
2 of mine had come unstuck from the bottom skin and were letting in water, so the track replacement was done just in time before major soggy board syndrome kicked in.
the tracks works perfectly by the way for the t60 with the 633 wing.
the delaminated internal spools were caused by me ramming into sandbanks during my learning phase, not bad workmanship.

Brizair10
Rare Poster
Posts: 34
Joined: Mon Sep 17, 2018 10:44 am
Kiting since: 2012
Gear: Onda 633, Old Tube kites, soul10
Brand Affiliation: None
Has thanked: 4 times
Been thanked: 4 times

Re: Moses T60 and 633 foil

Postby Brizair10 » Sun Mar 24, 2019 10:00 am

HI foiler alert.
I´m just in the same process. Holes are drilled and styrofoam is removed with an allen key. I put the holes back about 3,5 inches.
I thought about moving them further back, on the Moses T 38 board the holes for different mast positions are 4,5 inches apart..
This would put the holes right at the end of the stringer in the T 40, thought it would be a little more stable not too far back.
Now i just have to get some epoxy to fill it and redrill.
In the name of all Onda owning T40/T60 drillers: what´s the "inside info on how to do it the right way" ?

KVL
Rare Poster
Posts: 36
Joined: Thu Aug 18, 2011 8:25 am
Kiting since: 0
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Moses T60 and 633 foil

Postby KVL » Sun Mar 24, 2019 12:35 pm

I used to ride it. It is good. Foil was mounted in the standard holes which were in the most rear. Worked well.
Thou I think the 633 and the T60 is too "clumsy" in combination. Pick a smaller board for such big wing.

Foiler alert
Rare Poster
Posts: 4
Joined: Sat Mar 23, 2019 3:44 am
Kiting since: 2001
Local Beach: DELRAY AND BOYNTON
Style: Surf and foil
Gear: F-1 Bandit, Surfboard, foil boards
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Moses T60 and 633 foil

Postby Foiler alert » Mon Mar 25, 2019 3:15 am

Brizair10 wrote:
Sun Mar 24, 2019 10:00 am
HI foiler alert.
I´m just in the same process. Holes are drilled and styrofoam is removed with an allen key. I put the holes back about 3,5 inches.
I thought about moving them further back, on the Moses T 38 board the holes for different mast positions are 4,5 inches apart..
This would put the holes right at the end of the stringer in the T 40, thought it would be a little more stable not too far back.
Now i just have to get some epoxy to fill it and redrill.
In the name of all Onda owning T40/T60 drillers: what´s the "inside info on how to do it the right way" ?

The thing with the Allen key is the right way. Makes an epoxy plug. Thanks for all the answers! Looking forward to trying it.

Brizair10
Rare Poster
Posts: 34
Joined: Mon Sep 17, 2018 10:44 am
Kiting since: 2012
Gear: Onda 633, Old Tube kites, soul10
Brand Affiliation: None
Has thanked: 4 times
Been thanked: 4 times

Re: Moses T60 and 633 foil

Postby Brizair10 » Mon Mar 25, 2019 6:34 am

I wish you a dedicated drilling !

Foiler alert
Rare Poster
Posts: 4
Joined: Sat Mar 23, 2019 3:44 am
Kiting since: 2001
Local Beach: DELRAY AND BOYNTON
Style: Surf and foil
Gear: F-1 Bandit, Surfboard, foil boards
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Moses T60 and 633 foil

Postby Foiler alert » Fri Mar 29, 2019 12:14 am

Brizair10 wrote:
Mon Mar 25, 2019 6:34 am
I wish you a dedicated drilling !
Thanks! It's done, I just have to redrill the holes now :D

Brizair10
Rare Poster
Posts: 34
Joined: Mon Sep 17, 2018 10:44 am
Kiting since: 2012
Gear: Onda 633, Old Tube kites, soul10
Brand Affiliation: None
Has thanked: 4 times
Been thanked: 4 times

Re: Moses T60 and 633 foil

Postby Brizair10 » Fri Mar 29, 2019 12:59 pm

If you drill 6,5 or 7 mm like the original Moses holes it´s a little easier to mount the mast, especially on the beach. :thumb:

User avatar
dirtybeach
Rare Poster
Posts: 26
Joined: Wed Apr 12, 2017 4:45 pm
Kiting since: 2001
Gear: Naish Tomo WMFG
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 1 time

Re: Moses T60 and 633 foil

Postby dirtybeach » Sun Mar 31, 2019 9:21 pm

Foil wrote:
Sun Mar 24, 2019 2:11 am
last year I had my Moses T60 modified to take the 663 wingset, a custom shop cut out the hole plugs and inserted mast tracks instead, I had a look inside the board to see how the old holes were put in, very basic glass spools with drill holes through the center and not that well stuck to the boards skin,
2 of mine had come unstuck from the bottom skin and were letting in water, so the track replacement was done just in time before major soggy board syndrome kicked in.
the tracks works perfectly by the way for the t60 with the 633 wing.
the delaminated internal spools were caused by me ramming into sandbanks during my learning phase, not bad workmanship.
I would like to install mast tracks on my t60. Do you (or anyone else) have a link to where I can by them?

Do you have a measurement of the mast track mount position?

Cheers, thanks.


Return to “Kitesurfing”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 18 guests

cron