Contact   Imprint   Advertising   Guidelines

waveboard: pad breaks off

Forum for kitesurfers
ELI
Medium Poster
Posts: 192
Joined: Thu Sep 24, 2009 12:30 am
Local Beach: ELI
Style: Surf
Gear: Cabs,Sling and Custom
Brand Affiliation: None
Has thanked: 9 times
Been thanked: 6 times

Re: waveboard: pad breaks off

Postby ELI » Tue Jul 23, 2019 8:31 pm

$5 US ,w/free shipping

PullStrings
Very Frequent Poster
Posts: 1537
Joined: Sat Nov 26, 2011 7:54 pm
Gear: LEI's & Surfboards
Has thanked: 64 times
Been thanked: 54 times

Re: waveboard: pad breaks off

Postby PullStrings » Tue Jul 23, 2019 9:53 pm

Get this exact contact cement with the applicator built in the cap

Just clean the board and underside of pad with 70% isopropyl alcohol using a cloth

Let dry a couple minutes

Push pad down and trace outline with pencil

Pull up the pad as much as it can go and apply glue on the board inside of the outline

Now put glue on pad starting with area near the board making your way out until the outer edge

Wait 20-25 minutes for all the glue to dry

Assemble carefully pad to board because once it touches it can't be moved again

Press down with as much thumb pressure as possible every single areas of the pad and especially the edges

Give it a couple hours before going in the water

Image

Good luck
Happy kitesurfing


Return to “Kitesurfing”

Who is online

Users browsing this forum: aidy makeando, Google [Bot], vins1127 and 18 guests