Contact   Imprint   Advertising   Guidelines

Standalone ChickenLoop QuickRelease?

Forum for kitesurfers
User avatar
iriejohn
Very Frequent Poster
Posts: 2334
Joined: Fri Dec 18, 2015 11:04 pm
Weight: 80kg, 1.76m
Local Beach: 50.7752° N, 0.9076° W (UK South Coast)
Gear: Lieuwe Shotguns
Ozone Enduro V2s
Flite 14.5 Aluula
Duotone Fish
Brand Affiliation: None
Location: Noviomagus Reginorum
Has thanked: 392 times
Been thanked: 196 times

Re: Standalone ChickenLoop QuickRelease?

Postby iriejohn » Tue Nov 24, 2020 8:34 pm

jakemoore wrote:
Tue Nov 24, 2020 8:28 pm
alford wrote:
Tue Nov 24, 2020 8:21 pm
How about leaving 1cm tail with heat shrink cap?
It’s so incredibly easy to splice 5 mm amsteel. Why risk having a knot pull through?

I have had a bowline pull out with slippery high tech single braids. I have taken to putting an overhand knot in the bitter end.
Well exactly. If you want a "bar buffer" just do a Brummel splice then do a fig 8 near the loop. :thumb:

alford
Very Frequent Poster
Posts: 683
Joined: Thu Feb 25, 2016 7:53 pm
Gear: all brands
Brand Affiliation: None
Has thanked: 42 times
Been thanked: 29 times

Re: Standalone ChickenLoop QuickRelease?

Postby alford » Wed Nov 25, 2020 3:01 am

In real world applications the knot will exceed needed strength several times over.

Herman
Very Frequent Poster
Posts: 950
Joined: Tue Jun 04, 2019 7:09 pm
Style: My Own.
Gear: SLE, foils and C kites, TTs, Directionals, Landboards, Buggy.
Brand Affiliation: None
Has thanked: 90 times
Been thanked: 212 times

Re: Standalone ChickenLoop QuickRelease?

Postby Herman » Wed Nov 25, 2020 1:28 pm

^^If you want to go minimal you could use this. I have used it for several years to attach my harness runner to pinned shackles on my dynabar without any stopper knot in the tail. The metal work goes through the lower hole. I call it the splice hitch no idea if it has a proper originators name!
Attachments
07BC72E6-8C84-4240-8227-1FFBE6ADF73F.png
Last edited by Herman on Wed Nov 25, 2020 5:01 pm, edited 1 time in total.

chalks
Rare Poster
Posts: 39
Joined: Fri Sep 19, 2014 1:16 pm
Local Beach: UK south coast
Gear: Alpha 12m; Reos 5, 7 and 9. Surfboard and Moses foil
Brand Affiliation: None
Has thanked: 5 times
Been thanked: 1 time

Re: Standalone ChickenLoop QuickRelease?

Postby chalks » Wed Nov 25, 2020 3:22 pm

Image

Peter,

This is what I use. The depower in the Ozone CL is tied off with a Fig 8 knot. In the Duotone CL the depower is Brummell spliced around the swivel. Both depowers use 3mm line. In the Ozone the line is just passed up through itself.

Hope that this helps.
Attachments
IMG_6817.jpeg
IMG_6815.jpeg
IMG_6814.jpeg


Return to “Kitesurfing”

Who is online

Users browsing this forum: No registered users and 45 guests