Contact   Imprint   Advertising   Guidelines

Infexion Max bar / Seatbelt Quick Release

Forum for kitesurfers
Frequent Poster
Posts: 478
Joined: Tue Apr 07, 2009 5:13 am
Kiting since: 2009
Gear: kites: OR Flites & Cabrinha Velocity
Underground FLX 138, Slingshot foil, Mako Duke, Jimmy Lewis Flight Deck
Brand Affiliation: None
Location: NW Florida
Has thanked: 1 time
Been thanked: 12 times

Re: Infexion Max bar / Seatbelt Quick Release

Postby knot_moving » Sun Oct 11, 2020 10:21 pm

Why I used the roller:
I've had Dakine's first sliding hook that didn't slide, and I had the Dakine option hook that would slide and then jam on the ends.
-- so I wanted to be sure it would slide smoothly. Was out in 15-25 kts on a 10m today. It was very smooth the way it worked. Glad to hear it was maybe overkill. Because I bought the d-shackle I think I'm committed to using something like this.

The QR works great & I love the micro leash.
These users thanked the author knot_moving for the post:
iriejohn (Mon Oct 12, 2020 10:26 am)
Rating: 8.33%

Medium Poster
Posts: 188
Joined: Fri Sep 18, 2015 4:23 pm
Kiting since: 2015
Local Beach: Brouwersdam, Ouddorp
Style: Hydrofoil
Gear: Groove Wave, Ketos Foil, Cloud D2E 8 + 6.2 + 4.8+ 3.7, 2.8, 2.2
Brand Affiliation: None
Location: Rotterdam
Has thanked: 26 times
Been thanked: 23 times

Re: Infexion Max bar / Seatbelt Quick Release

Postby Huib » Mon Oct 12, 2020 9:58 am

ieism wrote:
Sun Oct 11, 2020 12:14 pm
Why are you using a roller in the first place? I just have the version with the fixed closed ring and it slides very smooth on a rope bar. I may have to replace the rope eventually, but I'm pretty sure that will take a very long time and is cheap.

Is there a performance benefit, I'm not noticing any drag or hanging without the roller at all.

This is the best system I've used so far. I had to pull the safety yesterday (started nuking, foil kite started to collapse on one side) and it's al lot easier than my old CL. At first I thought it did not release because I did not feel it jerk as much as a chicken loop would, but then I saw the kite harmonica. I cannot tell you how happy I am with this system. It makes sheeting in better for me, toeside is easier, release is better, packing the bar is easier,

I hope in a few years all brands will go to a similar system, and it will safe some cost when buying a bar because you don't need a QR for every bar you own or replace.
I speak from experience. You don't want ever that the robe will break. The lifespan of the rope is much longer with a roller than with your ring.
These users thanked the author Huib for the post:
iriejohn (Mon Oct 12, 2020 10:26 am)
Rating: 8.33%

Rare Poster
Posts: 43
Joined: Sun Jun 21, 2020 8:56 pm
Kiting since: 2018
Gear: Flysurfer Peak 4
Brand Affiliation: None
Has thanked: 10 times
Been thanked: 10 times

Re: Infexion Max bar / Seatbelt Quick Release

Postby ieism » Mon Oct 12, 2020 11:21 am

Off course, but SK78 is like $6 per meter, so I can buy plenty of it and throw a few spares in the car.

I was just curious if it was much smoother with a roller, I've used a carabiner with a roller before and it was not much smoother than this.

User avatar
Very Frequent Poster
Posts: 944
Joined: Tue May 14, 2002 1:00 am
Kiting since: 1999
Local Beach: New Brighton
Gear: Alkita boards
Zeeko Slash/AirWave/Scrambler
Spitfire XLW/ XXLW. GoFoil Kai/Iwa
GK Trix
FS Peak4
HB Legion
Brand Affiliation: GK enthusiast
Location: Te Wai Pounamu
Has thanked: 25 times
Been thanked: 85 times

Re: Infexion Seatbelt Quick Release

Postby bragnouff » Thu Oct 22, 2020 2:00 am

evan wrote:
Mon Jun 15, 2020 5:31 pm

Just received mine earlier this week and I'm pretty impressed by the design. And the spring loaded release of the ring when unloaded... almost cracked my laptop screen!

Question, though, is about how you'd mount that ring onto the depower rope WITHOUT it being spliced?
I like using plain length of braided dyneema from local boat shop, and being able to replace them on the spot quickly, without tools. I also like reversing the rope or shifting it somehow to spread the wear. Which is all possible to do when using a ClamCleat's aero cleat.
Anyway, here's some of the options I was considering:
Or make a bowline knot to make a loop/larkshead, and a skateboard bushing as cushioning between the top of that bowline knot and the hole in the bar.

I'm not worried at all to add space between ring and bar, as this is much shorter than my traditional QR, and I like having a stopper for my fully sheeted-in position.
(I can also use a longer spreader bar to QR connection to adjust that spacing).

Return to “Kitesurfing”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 5 guests