Re: Infexion Seatbelt Quick Release
Posted: Fri Jul 17, 2020 4:44 pm
My freeride setup from Infexion
Hi, can you post a close picture of the front line split? Looks interesting!
Thanks in advance!
Kiteforum.com
world's leading kitesurfing website
https://kiteforum.com/
Infexion Max bar / Seatbelt Quick Release
Page 15 of 27
Re: Infexion Seatbelt Quick Release
Posted: Fri Jul 17, 2020 6:44 pm
Re: Infexion Seatbelt Quick Release
Posted: Sat Jul 18, 2020 4:57 am
Is this bar for sale allready? i cant seem to find it on the infexion homepage...
Re: Infexion Seatbelt Quick Release
Posted: Sat Jul 18, 2020 6:30 am
Re: Infexion Seatbelt Quick Release
Posted: Sat Jul 18, 2020 6:32 am
This is what I‘m interested too!peppedurso wrote: ↑Fri Jul 17, 2020 6:44 pmHi, can you post a close picture of the front line split? Looks interesting!
Thanks in advance!
Re: Infexion Seatbelt Quick Release
Posted: Sat Jul 18, 2020 5:26 pm
Maybe I wasn’t clear.
I meant leave the Kauper primary (flag out) release as is and just replace the secondary release (which is either Wichard if you want the swivel) with the Infexion part. The Infexion release should have the same functionality as the Wichard, without the accidental releases!
This should work, so long as the kauper ring is a compatible size with the Infexion release...haven’t checked.
Agreed, your solution may be tidier but some folks may not want to mess with the Kauper primary release?
Re: Infexion Seatbelt Quick Release
Posted: Sun Jul 19, 2020 11:19 am
Re: Infexion Seatbelt Quick Release
Posted: Sun Jul 19, 2020 2:42 pm
I think this is what we are all interested to see close up
Re: Infexion Seatbelt Quick Release
Posted: Mon Jul 20, 2020 10:08 pm
Try to reach you on mail but no response so far. Vacation?evan wrote: ↑Fri Jul 17, 2020 10:44 amI advise you to to use a 3x15mm D-ring and 3x15mm ring for the flagout as used in the depower cord rings sets we are selling. Your setup can be dangerous as the 20mm flagout ring can get stuck between the 25mm ring and release housing making it unable to release.Onda wrote: ↑Fri Jul 17, 2020 9:46 am. A 25 mm diameter ring to the "fixed" line which is released by the QR, and a 20 mm ring to the "sliding" safety line. The safety line has to be put through the fixed line ring such that the smaller ring cannot slip through the larger ring (this is essential!).
Then just attach the Infexion QR to your harness and connect the larger ring to it. The smaller ring is connected to your safety leash.
Re: Infexion Seatbelt Quick Release
Posted: Tue Jul 21, 2020 9:46 am
I advise you to to use a 3x15mm D-ring and 3x15mm ring for the flagout as used in the depower cord rings sets we are selling. Your setup can be dangerous as the 20mm flagout ring can get stuck between the 25mm ring and release housing making it unable to release.
[/quote]
Hi evan,
why the combination of a D-ring and an O-ring? Because the O-ring will be "tilted" by the D-ring at a bigger angle, such that the O-ring cannot hinder the QR from being shifted away from the harness in case of release?
Many thanks in advance for any insight!