Where can I find valve spareparts for old F-One Bandit?

[GrodanBoll]

I unpacked an old F-One Volt and a Bandit 3 kite today. Unfortunately two valves on Volt kite are broken and one valve on the Bandit kite. See attached images.
Does anyone know where I can find replacement valves for these kites?

[faklord]

Search “seller:slav42” on eBay.

[GrodanBoll]

Search “seller:slav42” on eBay.

Unfortunately I can't see that he sells any f-one valves.

[GrodanBoll]

Search “seller:slav42” on eBay.

Sorry, I see now that he actually sells valves. https://www.ebay.com/itm/F-one-kite-Val ... ump-valve/

The 90 degree valve should work for the bladder and the straight one for the struts, right?

[Da Yoda]

Not knowing where you're located, look for replacement aftermarket valves. In the US FixMyKite has those exact replacement valves for the LE and struts.
https://fixmykite.com/proddetail.asp?pr ... gree_valve
https://fixmykite.com/proddetail.asp?pr ... ight_valve

Airtime has them too
https://www.airtimekite.com/airtime-kit ... kites.html

[kjorn]

I had the same issue, even with F-One replacement valves the same things happened. Total shit show. I fixed them countless times and eventually gave up and bought North.

If I were to try again I would use North bladders or North valves, they are much higher quality.

F-One valves on old kites are just really bad the kites are OK, but no where near as good as the Rebel or Edge or Screamer. But then I don't wave ride, so .... *shrug*

[JaDan]

I’ve replaced those valves with regular slingshot
One pump valves, just need to cut a longer piece of
One pump tubing.

Works fine so far.