Contact   Imprint   Advertising   Guidelines

Shinn Monk Delaminated

Forum for kitesurfers
plummet
Very Frequent Poster
Posts: 6819
Joined: Sat Aug 29, 2009 11:25 pm
Local Beach: EE
Favorite Beaches: NZ
Style: Terrain riding
Gear: Old wornout ozone.
Plummet hydrofoil and mutant
Brand Affiliation: None
Has thanked: 11 times
Been thanked: 224 times

Re: Shinn Monk Delaminated

Postby plummet » Tue Oct 19, 2021 10:42 pm

Thatl work....

andylc
Very Frequent Poster
Posts: 1175
Joined: Fri Apr 07, 2017 3:26 pm
Local Beach: Exmouth
Favorite Beaches: Saunton Sands
Gear: Reedin Supermodel V3 7,9,11m, Duotone Juice 13m
Saul Custom Wave Board 138cm
Nomad Superleggera LW 142cm
Brand Affiliation: None
Has thanked: 2 times
Been thanked: 139 times

Re: Shinn Monk Delaminated

Postby andylc » Wed Oct 20, 2021 12:02 pm

Hopefully that should be fine although I would have clamped harder than that with something that cranked down harder than spring clamps.

fastnetboarder
Rare Poster
Posts: 5
Joined: Sun Oct 17, 2021 11:51 pm
Kiting since: 2002
Gear: Shinn Monk / Cabrinha Switchblade
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Re: Shinn Monk Delaminated

Postby fastnetboarder » Sun Aug 21, 2022 9:47 am

Just following up in case anyone has similar issue in the future. This board is still working great almost a year after glueing with marine epoxy!
I kept an eye on it first few sessions after the big glue application, reapplied at edges a couple of times but has since held up really well.

So in short, if anyone is in a similar position in future my advice is - Don't Dump - Glue!
These users thanked the author fastnetboarder for the post (total 3):
CaptainKook (Sun Aug 21, 2022 10:05 am) • ham-er (Sun Aug 21, 2022 11:56 am) • casper2002 (Mon Aug 22, 2022 8:58 am)
Rating: 9.09%

kitexpert
Very Frequent Poster
Posts: 1394
Joined: Sun Aug 09, 2015 11:20 pm
Gear: many kites, also diy
Brand Affiliation: None
Has thanked: 51 times
Been thanked: 130 times

Re: Shinn Monk Delaminated

Postby kitexpert » Sun Aug 21, 2022 11:04 am

Yes, downunder is correct. That is difficult stuff to glue properly and apparently many manufacturers aren't able to do it to last. Epoxy glue is the best bet but also crazy glue can be tried.

When one of my boards started to do that i first glued delaminated spots. But then it got worse and almost around the board (top side though) I took an angle grinder and grind off all that loose plastic shit. Finally some black spray paint and it was all good

User avatar
kjorn
Very Frequent Poster
Posts: 831
Joined: Tue Feb 11, 2003 10:42 am
Brand Affiliation: None
Location: uk
Has thanked: 55 times
Been thanked: 29 times
Contact:

Re: Shinn Monk Delaminated

Postby kjorn » Tue Aug 23, 2022 12:49 pm

That's exactly what happened to my board. I just ripped all the bottom sheet off. I do wonder if it's still water tight. Some wood is showing in areas.

soeren76
Rare Poster
Posts: 26
Joined: Sun Mar 11, 2018 2:26 pm
Kiting since: 2015
Style: freeride
Gear: Vantage vulture v2 + v3
Lieuwe shotgun
Xboard surfboard
Brand Affiliation: None
Has thanked: 6 times
Been thanked: 2 times

Re: Shinn Monk Delaminated

Postby soeren76 » Tue Aug 23, 2022 1:08 pm

F1 had a similar issue with the 2017 Trax. I got mine swapped.

When it starts delaminating it goes fast. Not sure why some people need to give you a lot of heat. In my mind it shouldn't do it unless there has been some serious damage. But at 3 years it is probably difficult with a warranty claim.

knyfe
Very Frequent Poster
Posts: 618
Joined: Thu Feb 20, 2003 7:29 pm
Has thanked: 2 times
Been thanked: 75 times

Re: Shinn Monk Delaminated

Postby knyfe » Tue Aug 23, 2022 3:06 pm

Next time U glue it use some real pressure with C clamps. The ones you used don’t push enough to get all the glue out.

skyte
Very Frequent Poster
Posts: 609
Joined: Sat Jun 05, 2004 11:15 pm
Brand Affiliation: FLEXIFOIL
Location: Nomadic Flexi Rider
Has thanked: 2 times
Been thanked: 5 times

Re: Shinn Monk Delaminated

Postby skyte » Tue Aug 23, 2022 4:28 pm

This is just the top sheet delaminating. It's a manufacturing defect due to not being glued correctly and has happened on several brands in the past.
It actually makes no real difference to the board other than cosmetic. I just trimmed it off my board every now and then with a sharp knife and my board has lasted over 10 years :)

A shame that Shinn didn't respond. I guess it's out of warranty but you at least deserve a new board at cost price.


Return to “Kitesurfing”

Who is online

Users browsing this forum: Bing [Bot], Brent NKB, CaptainKook, Dave_5280, duddd, evan, Google [Bot], ham-er, jyka, Kitemenn, lifeinthehood, marinjo77, Smeagle, SolarSet, universalflush and 125 guests