Contact   Imprint   Advertising   Guidelines

Filler in groove carbon bar

Here you can exchange your experience and datas about your home build boards
User avatar
Medium Poster
Posts: 141
Joined: Tue Apr 03, 2018 10:02 pm
Kiting since: 2017
Weight: 80kg
Gear: Kitech FRS 12m
Peak4 3,4,5m
Best Cabo 8,11m
JN Randas 10.5m

Zeeko Spitfire xlw
Crazyfly Raptor 137
Crazyfly F-lite 115
Brand Affiliation: None
Has thanked: 45 times
Been thanked: 29 times

Filler in groove carbon bar

Postby lederhosen » Thu Sep 16, 2021 7:01 am

The center hole in my groove carbon bar is scratchy and makes the depower rope frizz.

Is it a good idea to spray the hole with filler to smooth the scratch or will the filler just rob off on the depower and make my hands grey?

Has anybody tried or found another solution?

Very Frequent Poster
Posts: 2258
Joined: Tue Dec 23, 2003 2:34 pm
Has thanked: 4 times
Been thanked: 20 times

Re: Filler in groove carbon bar

Postby Tone » Thu Sep 16, 2021 7:41 am

sand it with fine sanding paper.
These users thanked the author Tone for the post:
lederhosen (Thu Sep 16, 2021 7:52 am)
Rating: 6.67%

Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 2 guests