downunder wrote: ↑Wed Apr 19, 2017 3:32 am
^
That is a shame
I know a lot of kiters who admire wood grain on the boards. When done with a fiberglass, the craftsmanship is clearly visible as well as any irregularities:)
Your yellow rails will soon lost the colour under the Sun, particularly if made of epoxy (looks like epoxy rails). Red colour is way better. But nothing can beat the PU rails in colour
Thats a shame I know.!
Wood is so nice and a lot of builders are in market with only wood look sides..and have to admit some are great. But I have other plans....
Yeah the rails are epoxy with filler and pigment. I discussed the issue of discoloration from sun exposure...and sailman told m that's "safety yellow" and with the epoxy UV you wont have that... (*pigmennting normally will lower UV protection and epoxy specs ). Still under the carbon will be safe. Now in matters of the irregularities...hahaha is not finished it needs a little bit of sandind..... if your eye see something in the photos....
)Anyway I will soon reach the accuracy of the cnc...LOL
Anyway I have to see the behavior of carbon and ok the rails all around the board will show nice...and had to make gold logo?!?!. I finally made it but had a number of fails. I believe that I had to as a carbon black colour will look better with gold or silver detail....Anyway i spent some days making it...
This is the fourth board and I have used for rails : ABS and UHMW and pigmented epoxy. I really hate ABS, had so many issues applying it on outilne....and preparing the railsides before heatpress again..still the result was so nice!!! The UHMW has issues when sand it after having warm it to give shape..espesially in the tips..Epoxy is ok..but I am not 100% happy for the impact bahavior...I wonder. And add the cost...I spent so much epoxy and without any spill....So I decided to go to ABS for next one..since the best surface and appearance. PU rails that you talk about is the one orange / green you have applied..complete transparent? I like it and maybe is more easy to apply as the look flexy...ABS is so hard!!!! Where can I find??