Contact   Imprint   Advertising   Guidelines

First foilboard

Here you can exchange your experience and datas about your home build boards
Jyoder
Very Frequent Poster
Posts: 574
Joined: Thu Jul 20, 2017 8:31 pm
Kiting since: 2015
Local Beach: Chesapeake Bay (Annapolis area)
Gear: Zeeko bullet Foil and DIY board
Brand Affiliation: None
Location: Annapolis, Maryland
Has thanked: 18 times
Been thanked: 168 times

Re: First foilboard

Postby Jyoder » Tue Aug 01, 2017 8:58 pm

My diy plywood board broke yesterday when I nosedived it due riding too high and surfacing the wing. I had kerfed the nose to give it some kick and it broke at the seam. These boards get a lot of sudden stress loading on crashing like that. On one hand you need area in the nose to help plane on touchdown but too much adds need for extra reinforcement and weight.

faklord
Frequent Poster
Posts: 474
Joined: Sun Jan 09, 2011 6:03 pm
Brand Affiliation: None
Has thanked: 35 times
Been thanked: 80 times

Re: First foilboard

Postby faklord » Tue Aug 01, 2017 9:13 pm

TomW wrote:
Tue Aug 01, 2017 6:54 pm
tmcfarla wrote:
Tue Aug 01, 2017 6:06 pm
That sucks, hope you can fix it, looked like a nice board. What was the carbon/glass layup on this board?
No fix. Goes in the trash.
...
What I would do next time
1. Thicker foam over all, increase to 30mm min.
2. Longer piece of HD foam(?)
3. Deck and bottom would get 4 layers of 250g Uni D carbon about 200mm wide entire length of board
Another option is a couple of wood stringers from the foil mount up to f foot position. Something like 1-2cm wide red cedar or paulownia. Adds a lot of strength only where it's needed and not much of a weight penalty.

I bet you could even do a repair with a few stringers? Put them in from the top glass/carbon patch and cover with deck pad. Seems a shame to bin such a beauty.

TomW
Very Frequent Poster
Posts: 3585
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Lomma
Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 53 times
Been thanked: 193 times

Re: First foilboard

Postby TomW » Tue Aug 01, 2017 9:46 pm

Yeah probably. Haven't tossed it yet...

Benicia Wind
Rare Poster
Posts: 25
Joined: Wed Jul 23, 2014 7:04 pm
Local Beach: Benicia CA USA
Favorite Beaches: Benicia CA USA
Style: strapless foil
Gear: DIY foil. NRG surfboard. Jimmy Lewis surfboard. Liquid Force One 12M. Slingshot Rally 9M.
Brand Affiliation: None
Location: Benicia, CA USA
Has thanked: 0
Been thanked: 0

Re: First foilboard

Postby Benicia Wind » Tue Aug 01, 2017 10:51 pm

K-Roy wrote:
Mon Jul 31, 2017 12:23 pm
My first DIY pocket board,

112 x 40 cm
1.5cm thick wood plus deck pad 5mm.
Total wieght: 6.5 kg
Board: 3.5 kg
Foil: 3 kg

Its + 0.5 kg, but feels lighter compared to my regular board when on the beach, probably because of the smaaler size...

I not yet had the chance to try it so will update on water start etc.
Im happy to say at least it floats with the foil. :wink:

cheers
This is the kind of board I want to make. Can you give a description of the construction? Does it float OK?

User avatar
K-Roy
Frequent Poster
Posts: 300
Joined: Tue Jan 27, 2015 5:42 pm
Local Beach: Lake Balaton
Taiba, Brasil
Favorite Beaches: Cumbuco to Jeri
Style: strapless SB & strapless FB
Gear: Fone Bandit X, XII, Breeze V2. and Diablo V.1
FW Vader, OR Duke, Mitu Pro, Fone foil
Brand Affiliation: Fone brand Ambassador
Has thanked: 12 times
Been thanked: 12 times

Re: First foilboard

Postby K-Roy » Wed Aug 02, 2017 8:24 am

hello,
The board is laminated 15 mm.
It was originally a prototype for wake skate and a friend of mine give it to me, so its not tested as far as the rocker and shape is concerned.
We are having windless days over here, so I have to update you on how it works.
It floats OK. the front sticks up about 10cm from the water the back 1-2 cm.
The part where the mast is, just about water level.

cheers
Attachments
received_10159015172885237.jpeg
received_10159015175740237.jpeg

User avatar
K-Roy
Frequent Poster
Posts: 300
Joined: Tue Jan 27, 2015 5:42 pm
Local Beach: Lake Balaton
Taiba, Brasil
Favorite Beaches: Cumbuco to Jeri
Style: strapless SB & strapless FB
Gear: Fone Bandit X, XII, Breeze V2. and Diablo V.1
FW Vader, OR Duke, Mitu Pro, Fone foil
Brand Affiliation: Fone brand Ambassador
Has thanked: 12 times
Been thanked: 12 times

Re: First foilboard

Postby K-Roy » Sun Aug 06, 2017 10:00 pm

Benicia Wind wrote:
Tue Aug 01, 2017 10:51 pm
K-Roy wrote:
Mon Jul 31, 2017 12:23 pm
My first DIY pocket board,

112 x 40 cm
1.5cm thick wood plus deck pad 5mm.
Total wieght: 6.5 kg
Board: 3.5 kg
Foil: 3 kg

Its + 0.5 kg, but feels lighter compared to my regular board when on the beach, probably because of the smaaler size...

I not yet had the chance to try it so will update on water start etc.
Im happy to say at least it floats with the foil. :wink:

cheers
This is the kind of board I want to make. Can you give a description of the construction? Does it float OK?
Today we had good wind here and I had my first session on the new pocket board.
I have to say I'm very happy with the result.
The water start needed a few try, but once diled in it was ok.
Since its a very low volume board it needs wind, I used it today in 15-20 knots.
I will use my regular board for low wind sess.
One other thing... it does not drift down wind like a regular foilboard... I actually did some body draging today. (its a firs since started foilig)

:)

User avatar
downunder
Very Frequent Poster
Posts: 2814
Joined: Mon Jul 01, 2013 7:16 am
Gear: building my own
Brand Affiliation: None
Location: Perth, Australia
Has thanked: 153 times
Been thanked: 160 times

Re: First foilboard

Postby downunder » Mon Aug 07, 2017 4:21 am

Benicia Wind wrote:
Tue Aug 01, 2017 10:51 pm
K-Roy wrote:
Mon Jul 31, 2017 12:23 pm
My first DIY pocket board,

112 x 40 cm
1.5cm thick wood plus deck pad 5mm.
Total wieght: 6.5 kg
Board: 3.5 kg
Foil: 3 kg

Its + 0.5 kg, but feels lighter compared to my regular board when on the beach, probably because of the smaaler size...

I not yet had the chance to try it so will update on water start etc.
Im happy to say at least it floats with the foil. :wink:

cheers
This is the kind of board I want to make. Can you give a description of the construction? Does it float OK?
Good build.

However, 3.5kg is very, very heavy for 112x40 board.

My Paulownia DIY from here http://kiteforum.com/viewtopic.php?f=107&t=2387451

is 1.87kg with fins and SS inserts and you can see the construction.

Personally I would always reach for a lighter board no matter what.

D.

User avatar
K-Roy
Frequent Poster
Posts: 300
Joined: Tue Jan 27, 2015 5:42 pm
Local Beach: Lake Balaton
Taiba, Brasil
Favorite Beaches: Cumbuco to Jeri
Style: strapless SB & strapless FB
Gear: Fone Bandit X, XII, Breeze V2. and Diablo V.1
FW Vader, OR Duke, Mitu Pro, Fone foil
Brand Affiliation: Fone brand Ambassador
Has thanked: 12 times
Been thanked: 12 times

Re: First foilboard

Postby K-Roy » Mon Aug 07, 2017 10:18 am

Hello Downunder,

Beautiful board, congratulations!

You are right, the board is heavy for its size.
This is only a "prototype" in a sense that I was not sure about the size I will be able to successfully ride as this is my first try with a strapless foil pocket board.
We have very choppy conditions at my home spot.
A laminated wood board is very strong, which is a welcome, since I broken my first board in half, just like TomW (see page 2) and punched a few holes in my second carbon board, when trying freestyle trick's.
I see two possibilities to reduce weight in my next try...
The laminated wood could be less then 15mm. as its a very strong construction and the KF to plate converter made of carbon.
(its some kind of aluminium and I think its about 300gramms)
Of course I could loose the full deck pad, and use wax or sugar grain etc. as well.
Regarding the size, I know there is a few cm in the front, but for now I will keep it as it is, because with the strong rocker it helps in tuch downs.
The target is to get a board which is not longer than my foil mast, so I can pack it in a bag to travel and check it on a plane with out extra charge...

any idea wellcome!

cheers

User avatar
K-Roy
Frequent Poster
Posts: 300
Joined: Tue Jan 27, 2015 5:42 pm
Local Beach: Lake Balaton
Taiba, Brasil
Favorite Beaches: Cumbuco to Jeri
Style: strapless SB & strapless FB
Gear: Fone Bandit X, XII, Breeze V2. and Diablo V.1
FW Vader, OR Duke, Mitu Pro, Fone foil
Brand Affiliation: Fone brand Ambassador
Has thanked: 12 times
Been thanked: 12 times

Re: First foilboard

Postby K-Roy » Sat Aug 12, 2017 11:46 pm

"The laminated wood could be less then 15mm. as its a very strong construction..."

Well, I was wrong, so back to the drowing board.
:(
Attachments
20170812_180701.jpg

Jyoder
Very Frequent Poster
Posts: 574
Joined: Thu Jul 20, 2017 8:31 pm
Kiting since: 2015
Local Beach: Chesapeake Bay (Annapolis area)
Gear: Zeeko bullet Foil and DIY board
Brand Affiliation: None
Location: Annapolis, Maryland
Has thanked: 18 times
Been thanked: 168 times

Re: First foilboard

Postby Jyoder » Sun Aug 13, 2017 1:40 am

Was that ply board glassed? Looks like it wasn't. Also, the ply layers look like only a couple very thin hardwood and rest filler. I'm using Baltic birch which has much better strength but am glassing it as well with 2-3x 6 oz. s cloth. Should be bullet-proof.
Attachments
IMG_0298.JPG
IMG_0294.JPG


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 163 guests