Here you can exchange your experience and datas about your home build boards
-
seglarn98
- Medium Poster
- Posts: 53
- Joined: Mon Jan 28, 2019 11:22 pm
- Kiting since: 2016
- Weight: 70
- Local Beach: Traveling, doing an olympic campaign in Nacra 17.
- Gear: Moses Hydrofoils and Flysurfer kites
-
Has thanked:
6 times
-
Been thanked:
6 times
Postby seglarn98 » Fri Feb 01, 2019 6:36 pm
Hi! Have you build a board using the trackbox? If so, any tips?
-
Europ2
- Frequent Poster
- Posts: 473
- Joined: Wed Mar 01, 2006 7:51 pm
- Brand Affiliation: None
-
Has thanked:
14 times
-
Been thanked:
7 times
Postby Europ2 » Mon Mar 11, 2019 10:42 pm
faklord wrote: ↑Fri Oct 12, 2018 8:24 pm
Masts : (...) the mounting holes do not run through the full-length, so not easy to cut down.
How did you guess that ? A screwdriver in the screw hole ?
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Tue Mar 12, 2019 3:25 am
Interesting,
so the strutless is not really a strutless. Nice concept. How does it work with and without the 'strut'? The plastic would not provide enough support or rigidity tho...
-
AndersP
- Frequent Poster
- Posts: 274
- Joined: Mon Jul 03, 2017 9:23 pm
- Gear: Foil and Mutant
- Brand Affiliation: None
- Location: Goteborg
-
Has thanked:
64 times
-
Been thanked:
56 times
Postby AndersP » Sun Mar 31, 2019 1:36 pm
There is no need to cut the masts as they come in 45, 65, 80 and 90 cm lengths.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 146 guests