Page 3 of 3
Re: DIY pigtails
Posted: Sun Oct 27, 2019 10:12 am
by matanshapira
Anybody can recommend a dyneema line that's not slippery for pigtails?
Re: DIY pigtails
Posted: Sun Oct 27, 2019 11:04 am
by nixmatters
matanshapira wrote: ↑Sun Oct 27, 2019 10:12 am
Anybody can recommend a dyneema line that's not slippery for pigtails?
One of the main properties of UHMWPE is very low surface tension, i.e. slippery.
A line with heavier coating is likely to be less slippery, but can't recommend specific make/model.
I recently got these original Cabrinha pigtails, 2 of which are adjustable, for less than 10USD/set and I'm sorted out with pigtails for next few years. Now I can spend my free time splicing main lines and other stuff.
Re: DIY pigtails
Posted: Sun Oct 27, 2019 2:07 pm
by faklord
matanshapira wrote: ↑Sun Oct 27, 2019 10:12 am
Anybody can recommend a dyneema line that's not slippery for pigtails?
A blob of Cyanoacrylate glue on a knot in dyneema will stop any slippage.
Just try it. Doesn’t seem to be affected by subsequent water immersion.
Makes it pretty difficult to remove the knot at a later date though.
Re: DIY pigtails
Posted: Sun Oct 27, 2019 5:33 pm
by br44
How does your figure 8 slip - did you try adding simple or double overhand knots? That should stop slippage.
Re: DIY pigtails
Posted: Tue Oct 29, 2019 6:46 am
by matanshapira
br44 wrote: ↑Sun Oct 27, 2019 5:33 pm
How does your figure 8 slip - did you try adding simple or double overhand knots? That should stop slippage.
E3CE15B9-6359-417D-99B4-41393801CB80.jpeg
I wanna have multiple knot options so adding another one to hold it isn't an option.
Re: DIY pigtails
Posted: Tue Oct 29, 2019 5:45 pm
by br44
matanshapira wrote: ↑Tue Oct 29, 2019 6:46 am
br44 wrote: ↑Sun Oct 27, 2019 5:33 pm
How does your figure 8 slip - did you try adding simple or double overhand knots? That should stop slippage.
E3CE15B9-6359-417D-99B4-41393801CB80.jpeg
I wanna have multiple knot options so adding another one to hold it isn't an option.
You can have as many knots as you want, without slippage, on the back lines. And do the adjustments there.
For the front lines, adding some kind of stopper knot for the figure 8 should fix the issue of the slippery dyneema.
Re: DIY pigtails
Posted: Tue Oct 29, 2019 7:07 pm
by Herman
matanshapira
I have used 3mm dyneema from Marlows, Southern Ropes and Holt without having knot slippage problems. I set the knots with 2 bars one through the loop one with the line wound and half hitched. Stand on one bar and do an appropriate dead lift with the other bar; then cut to length. If you have to pull a bitter end, tape it and use pliers or molegrips to grip and pull it in a way that you do not injure yourself if it slips.
In the past I have occasionally put a few stitches through a knot and you could consider that if your dyneema is particularly slippery, although a well set knot goes pretty hard and is not the easiest thing to stitch. I would not expect to stitch the knots for an ordinary pigtail.
The Holt dyneema I have used has a tacky waxy coating which gives the impression of making a knot set particularly well but i don't think it is a major point. The coating disappears with use.
If you want confidence in your work you can use your full body weight to proof test it as we are talking high working loads for 3mm dyneema.
As an aside and to understand how things are working you may find these questions interesting:
72x diameter is for full load :- is that needed?
If you took an unlocked tail out of the splice would it slip through a loaded larks head?
Is the tail more likely to slip under low load or high load?
Regards Herman.
Re: DIY pigtails
Posted: Thu May 21, 2020 12:20 pm
by gator1
I just noticed that the pigtails on most major brands are not spliced but stitched side by side together.
Re: DIY pigtails
Posted: Thu May 21, 2020 6:31 pm
by Peert
matanshapira wrote: ↑Tue Oct 29, 2019 6:46 am
br44 wrote: ↑Sun Oct 27, 2019 5:33 pm
How does your figure 8 slip - did you try adding simple or double overhand knots? That should stop slippage.
E3CE15B9-6359-417D-99B4-41393801CB80.jpeg
I wanna have multiple knot options so adding another one to hold it isn't an option.
An alternative for multiple knot options is this:
You can adjust the length by making a loop using the loop side..
Only splice no stitch..