Here you can exchange your experience and datas about your home build boards
-
fluidity
- Frequent Poster
- Posts: 393
- Joined: Sat Mar 19, 2016 11:20 pm
- Kiting since: 2015
- Local Beach: Ngati Toa, Plimmerton, Titahi Bay, Waikanae, Petone, Seatoun, Lyall Bay, Eastbourne, Lake Wairarapa
- Favorite Beaches: Plimmerton
- Style: Wave, jump
- Gear: Late model Switch kites element and nitros,
DIY CAD ultra-concave wave twintips 1500 and 130mm with my own fin designs. Easy upwind, awesome carving. Switch Nitro 10m V7, Naish 5.3m Wing. Now focussing on Wingsurfing to rise to a new challenge. Building my own foils from my CAD design and 3D prints, built a CNC machine last year and now cutting designs with CNC as well as 3D printing.
Up to 3 DIY foil designs built and getting the hang of wingsurf foiling as we switch into 2021.
- Location: Porirua New Zealand
-
Has thanked:
29 times
-
Been thanked:
41 times
Postby fluidity » Mon Aug 17, 2020 10:55 am
tahoedirk wrote: ↑Sun Aug 16, 2020 3:43 pm
Thin CA glue and kicker/accelerator will work
That works for me too.
I've started from scratch, complete self build. Automotive filler paint is great too. And some of the automotive gloss paints have a great skin tightening effect that will close holes if you can get the paint in in the first place. I'm so stoked finally having mine at wax & polish stage after a crazy amount of unskilled filling and painting work.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 7 guests
