Here you can exchange your experience and datas about your home build boards
-
pvb
- Rare Poster
- Posts: 19
- Joined: Fri Mar 24, 2017 4:49 am
- Gear: North, RRD, Naish
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
1 time
Postby pvb » Sat Oct 17, 2020 12:48 am
Does anyone make an adapter to be able to fit a Moses fuselage on a Lift mast? I haven’t been able to find this. If not produced do you know of anyone who could make this?
Peter
-
tmcfarla
- Frequent Poster
- Posts: 447
- Joined: Sun Apr 16, 2006 6:35 am
-
Has thanked:
9 times
-
Been thanked:
54 times
Postby tmcfarla » Sat Oct 17, 2020 1:35 am
I've never heard of a Lift to Moses adaptor. I think there is an adaptor for moses fuse on an aluminum slingshot mast, that is probably going to be more economical than paying someone to make a custom adaptor.
-
Hzipp
- Rare Poster
- Posts: 1
- Joined: Mon Oct 19, 2020 8:47 pm
- Kiting since: 2005
- Weight: 80
- Local Beach: Zandvoort
- Gear: Nobile
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Hzipp » Mon Oct 26, 2020 7:21 am
This depends on the connection mast - fuselage. I did connect aluminium mast and carbon mast from other brands to Lift foil - and it is easy, you wax the inside of the fuselage, insert mast and fill the gap with the epoxy plus cutted carbon or glass. But lift has big gap on fuselage where the mast is inserted, simular to fin box.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 48 guests