Contact   Imprint   Advertising   Guidelines

Race Bar Lines

Here you can exchange your experience and datas about your home build boards
bisdremis
Rare Poster
Posts: 50
Joined: Thu Feb 04, 2010 2:19 pm
Local Beach: agelohori
Favorite Beaches: kerros, prassonisi, rahhes
Gear: swithcblade ids
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 0

Race Bar Lines

Postby bisdremis » Tue Nov 24, 2020 11:17 am

:D Hello , i plan to build some race bars and i found an online source of dynnema sk78 lines .
do you find those specs adequate for my purpose ?
1,5MM.PNG
for front lines
1,5MM.PNG (13.72 KiB) Viewed 508 times
1MM.PNG
for steering lines
1MM.PNG (13.63 KiB) Viewed 508 times
Any supplier source recommendations?

nixmatters
Frequent Poster
Posts: 444
Joined: Sun Jun 12, 2016 12:38 pm
Kiting since: 2009
Style: freeride. started foiling, not there yet
Gear: mostly custom made
Brand Affiliation: None currently
Has thanked: 166 times
Been thanked: 98 times

Re: Race Bar Lines

Postby nixmatters » Tue Nov 24, 2020 12:30 pm

230daN is quite low for a 1,5 mm SK78 line. The 1mm seems OK, but there is a lot more than max breaking load for racing lines.

Where are you based? From your fav spots it looks like Greece.

User avatar
Schietwedder
Medium Poster
Posts: 56
Joined: Sun Dec 09, 2018 1:35 pm
Local Beach: Surendorf, Kiel, Germany
Gear: Diy Gear
Brand Affiliation: None
Has thanked: 9 times
Been thanked: 23 times

Re: Race Bar Lines

Postby Schietwedder » Tue Nov 24, 2020 2:28 pm

I would recommend Liros DC Pro for racing lines.
201 or 161 for steering lines and 301 for power lines if you want to go thin, 301 and 401 for a bit more safety.

Liros is reasonable priced, and really good quality/long life.

evan
Very Frequent Poster
Posts: 623
Joined: Sat Jan 31, 2004 5:48 pm
Kiting since: 2002
Local Beach: Brouwersdam
Style: Hydrofoil - Big Air
Gear: Infexion bars
Brand Affiliation: Infexion
Has thanked: 8 times
Been thanked: 100 times
Contact:

Re: Race Bar Lines

Postby evan » Tue Nov 24, 2020 6:00 pm

Don't go too thin, top riders are pushing so much power that they ride 400-500DaN lines just to keep them from snapping as losing multiple races due to gear failure is more costly than a tiny bit of drag.

Mossy 757
Very Frequent Poster
Posts: 1857
Joined: Fri Sep 11, 2015 5:10 pm
Local Beach: First Landing State Park, Virginia Beach Oceanfront
Style: Kitefoil
Gear: Delta Hydrofoil and board. Cabrinha Velocity 9m, Flysurfer Sonic2 11m, Ozone R1V2 15m
Has thanked: 41 times
Been thanked: 70 times

Re: Race Bar Lines

Postby Mossy 757 » Tue Nov 24, 2020 6:40 pm

Not sure what line these specs come from, but it's not material I'd want to race with, very low performance for diameter.

Check out SK Shapes website, he sells a bunch of race lines. You can buy that material bulk and make your own if you know how to splice.

https://www.skshapes.com/shop/flying-lines/

Also note what Flysurfer is currently using on their race bars. I have one currently I've used 3 times and it is EXCELLENT, best stock race bar you can buy off the shelf.

https://flysurfer.com/project/race-control-bar/

"The particularly slim design of the RACE Control Bar is further enhanced by the aerodynamically designed floaters and flying lines. The low stretch “Deep Black” DC300 front lines are attached to the Ronstan pulley in the center and are built to withstand the enormous amount of force created by hydrofoil racing. The thin DC161 back lines are designed for absolute performance and can be shortened using a knot adjuster underneath the floater. The RACE Control Bar is configured with 12m flying lines and 3m extensions."

alpaia
Rare Poster
Posts: 46
Joined: Tue May 12, 2020 9:15 pm
Local Beach: monteynard
Favorite Beaches: kerhiilio almanarre leucate
Style: relaxed
Gear: naish kites diy boards
Brand Affiliation: None
Has thanked: 7 times
Been thanked: 6 times

Re: Race Bar Lines

Postby alpaia » Tue Nov 24, 2020 10:43 pm

Hi, not a pro like evan and co but I refurbished two bars for my own usage,
1.5mm should be stronger, I found cousin (france) line by meter that is 390 daN for 1.5mm, was not too expensive.
Also consider ease to splice, and durability of coating and stiffness / ease to untangle.
Not a racer, more reliability oriented, long freeride/wave sessions.


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 1 guest