Contact   Imprint   Advertising   Guidelines

How I made my own "Fireloop"

Here you can exchange your experience and datas about your home build boards
Adek
Rare Poster
Posts: 25
Joined: Sat Aug 20, 2016 12:03 pm
Kiting since: 1997
Local Beach: Nha Trang, Mui Ne
Favorite Beaches: Mui Ne
Style: Freeride, Freestyle
Gear: Ozone Edge 9m, Turbine 13m, Nobile NHP 137x44
Brand Affiliation: Sup4you
Has thanked: 3 times
Been thanked: 2 times

How I made my own "Fireloop"

Postby Adek » Thu Nov 26, 2020 6:40 pm

I am a 100% hooked rider and here is how I improve my harness hook. I cut it off and bend steel part as a limiter to soft "Fireloop". This design is very simple and cost effective for those who ride hooked and like toeside carving. This simple solution eliminate shoulder of force from hook and move point of force to the steel tube on your harness maximum close to your body. It has a serious advantages due to regular harness hooks. When you on toeside your harness never twist right or left. On jumps harness steel bar not twist horizontally and not push to your ribs. Lately I improved my "Fireloop" a little bit:

I use this "FireLoop" more than 2 years. It is safe, cost efficient and reliable and have no problem with release and other safety!
Attachments
My harness FireLoop.jpg

Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 101 guests