Here you can exchange your experience and datas about your home build boards
-
supachip1
- Medium Poster
- Posts: 169
- Joined: Sat Apr 09, 2011 1:33 pm
- Local Beach: south coast uk
- Brand Affiliation: None
-
Has thanked:
21 times
-
Been thanked:
15 times
Postby supachip1 » Thu Jan 07, 2021 2:26 am
Hi,
I have an old spectrum board I use for light wind but can't get the stance the same as my normal board so I wondered if I could router out a track system in it.
I've not checked the thicknesses of the spectrum yet but just wondered if anyone had done this and anytjng I should consider.
Are the Norths re-enforced around that part of the board. The channel is only 1/16th in, any chance of break out?
Cheers
-
dericcio2
- Medium Poster
- Posts: 73
- Joined: Wed May 23, 2007 1:18 pm
- Local Beach: South of Germany and north east Italy
- Style: Freestyle Freeride
- Gear: Dice 12
Juice 11
Evo 9
Slick 5
RRD bliss LTD
Curve and Fluid foil
- Brand Affiliation: None
-
Has thanked:
4 times
-
Been thanked:
5 times
Postby dericcio2 » Thu Jan 07, 2021 8:09 am
i have done this on my custom volume board. track self made by 3d printing.( file available in the thread pocket board). laminated over 3x200 glass + 1patchx200 bidiagonal carbon. probably it is overengineered.
tested only for two hours till now andit worked well
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 368 guests